I have installed and run flexlm with permanent license. Flexlm diagnostic
shows no error. But when I run IDE and try to create a new C project, it
displays Installation Error message “QNX SDK has not been installed or there
is a licensing problem”. When I click OK to continue, the Architecture tab
is empty. During installation, I select to install x86 only. Can anyone tell
me what could be wrong here? Thanks.
JS <jsukamtoh@infolink.co.id> wrote:
I have installed and run flexlm with permanent license. Flexlm diagnostic
shows no error. But when I run IDE and try to create a new C project, it
displays Installation Error message “QNX SDK has not been installed or there
is a licensing problem”. When I click OK to continue, the Architecture tab
is empty. During installation, I select to install x86 only. Can anyone tell
me what could be wrong here? Thanks.
If you open the FlexLM configuration app and go to the “Server Status”
tab and click the Perform Status Inquery button, do you get output that
shows both QNX_SE and QNX_PE licenses?
chris
–
Chris McKillop <cdm@qnx.com> “The faster I go, the behinder I get.”
Software Engineer, QSSL – Lewis Carroll –
http://qnx.wox.org/
I guess so. Here is what I got:
Status
Flexible License Manager status on Thu 5/29/2003 06:33
[Detecting lmgrd processes…]
License server status: 27000@MIP-JS
License file(s) on MIP-JS: C:\QNXsdk\QNXLicense.lic:
MIP-JS: license server UP (MASTER) v8.1
Vendor daemon status (on MIP-JS):
qnxlm: UP v8.1
Feature usage info:
Users of QNX_SE: (Total of 1 license available)
Users of QNX_PE: (Total of 1 license available)
and the Server Diags shows this:
Diagnostics
FLEXlm diagnostics on Thu 5/29/2003 06:43
License file: C:\QNXsdk\QNXLicense.lic
“QNX_SE” v620, vendor: qnxlm
License server: MIP-JS
floating license no expiration date
This license can be checked out
“QNX_PE” v620, vendor: qnxlm
License server: MIP-JS
floating license no expiration date
This license can be checked out
“Chris McKillop” <cdm@qnx.com> wrote in message
news:bb32fk$3ff$1@nntp.qnx.com…
JS <> jsukamtoh@infolink.co.id> > wrote:
I have installed and run flexlm with permanent license. Flexlm
diagnostic
shows no error. But when I run IDE and try to create a new C project, it
displays Installation Error message “QNX SDK has not been installed or
there
is a licensing problem”. When I click OK to continue, the Architecture
tab
is empty. During installation, I select to install x86 only. Can anyone
tell
me what could be wrong here? Thanks.
If you open the FlexLM configuration app and go to the “Server Status”
tab and click the Perform Status Inquery button, do you get output that
shows both QNX_SE and QNX_PE licenses?chris
–
Chris McKillop <> cdm@qnx.com> > “The faster I go, the behinder I get.”
Software Engineer, QSSL – Lewis Carroll –
http://qnx.wox.org/
Okay. Now if you open a terminal and attempt to run qcc, what happens?
chris
JS <jsukamtoh@infolink.co.id> wrote:
I guess so. Here is what I got:
Status
Flexible License Manager status on Thu 5/29/2003 06:33
[Detecting lmgrd processes…]
License server status: 27000@MIP-JS
License file(s) on MIP-JS: C:\QNXsdk\QNXLicense.lic:MIP-JS: license server UP (MASTER) v8.1
Vendor daemon status (on MIP-JS):
qnxlm: UP v8.1
Feature usage info:
Users of QNX_SE: (Total of 1 license available)
Users of QNX_PE: (Total of 1 license available)
and the Server Diags shows this:Diagnostics
FLEXlm diagnostics on Thu 5/29/2003 06:43
License file: C:\QNXsdk\QNXLicense.lic
“QNX_SE” v620, vendor: qnxlm
License server: MIP-JS
floating license no expiration date
This license can be checked out“QNX_PE” v620, vendor: qnxlm
License server: MIP-JS
floating license no expiration date
This license can be checked out
“Chris McKillop” <> cdm@qnx.com> > wrote in message
news:bb32fk$3ff$> 1@nntp.qnx.com> …
JS <> jsukamtoh@infolink.co.id> > wrote:
I have installed and run flexlm with permanent license. Flexlm
diagnostic
shows no error. But when I run IDE and try to create a new C project, it
displays Installation Error message “QNX SDK has not been installed or
there
is a licensing problem”. When I click OK to continue, the Architecture
tab
is empty. During installation, I select to install x86 only. Can anyone
tell
me what could be wrong here? Thanks.
If you open the FlexLM configuration app and go to the “Server Status”
tab and click the Perform Status Inquery button, do you get output that
shows both QNX_SE and QNX_PE licenses?chris
–
Chris McKillop <> cdm@qnx.com> > “The faster I go, the behinder I get.”
Software Engineer, QSSL – Lewis Carroll –
http://qnx.wox.org/
\
–
Chris McKillop <cdm@qnx.com> “The faster I go, the behinder I get.”
Software Engineer, QSSL – Lewis Carroll –
http://qnx.wox.org/
I am not sure how to do that. Can you please show me the step? I am running
IDE on Windows XP Pro.
“Chris McKillop” <cdm@qnx.com> wrote in message
news:bb3tn3$354$1@nntp.qnx.com…
Okay. Now if you open a terminal and attempt to run qcc, what happens?
chris
JS <> jsukamtoh@infolink.co.id> > wrote:
I guess so. Here is what I got:
Status
Flexible License Manager status on Thu 5/29/2003 06:33
[Detecting lmgrd processes…]
License server status: 27000@MIP-JS
License file(s) on MIP-JS: C:\QNXsdk\QNXLicense.lic:MIP-JS: license server UP (MASTER) v8.1
Vendor daemon status (on MIP-JS):
qnxlm: UP v8.1
Feature usage info:
Users of QNX_SE: (Total of 1 license available)
Users of QNX_PE: (Total of 1 license available)
and the Server Diags shows this:Diagnostics
FLEXlm diagnostics on Thu 5/29/2003 06:43
License file: C:\QNXsdk\QNXLicense.lic
“QNX_SE” v620, vendor: qnxlm
License server: MIP-JS
floating license no expiration date
This license can be checked out“QNX_PE” v620, vendor: qnxlm
License server: MIP-JS
floating license no expiration date
This license can be checked out
“Chris McKillop” <> cdm@qnx.com> > wrote in message
news:bb32fk$3ff$> 1@nntp.qnx.com> …
JS <> jsukamtoh@infolink.co.id> > wrote:
I have installed and run flexlm with permanent license. Flexlm
diagnostic
shows no error. But when I run IDE and try to create a new C project,
it
displays Installation Error message “QNX SDK has not been installed
or
there
is a licensing problem”. When I click OK to continue, the
Architecture
tab
is empty. During installation, I select to install x86 only. Can
anyone
tell
me what could be wrong here? Thanks.
If you open the FlexLM configuration app and go to the “Server Status”
tab and click the Perform Status Inquery button, do you get output that
shows both QNX_SE and QNX_PE licenses?chris
–
Chris McKillop <> cdm@qnx.com> > “The faster I go, the behinder I
get.”
Software Engineer, QSSL – Lewis Carroll –
http://qnx.wox.org/
\Chris McKillop <> cdm@qnx.com> > “The faster I go, the behinder I get.”
Software Engineer, QSSL – Lewis Carroll –
http://qnx.wox.org/
I have tried to re-install the whole thing, but it has the same result. I
have also tried to install the patch and it ends up with the same problem.
Somehow the IDE could not detect the Flexlm.
“Chris McKillop” <cdm@qnx.com> wrote in message
news:bb3tn3$354$1@nntp.qnx.com…
Okay. Now if you open a terminal and attempt to run qcc, what happens?
chris
JS <> jsukamtoh@infolink.co.id> > wrote:
I guess so. Here is what I got:
Status
Flexible License Manager status on Thu 5/29/2003 06:33
[Detecting lmgrd processes…]
License server status: 27000@MIP-JS
License file(s) on MIP-JS: C:\QNXsdk\QNXLicense.lic:MIP-JS: license server UP (MASTER) v8.1
Vendor daemon status (on MIP-JS):
qnxlm: UP v8.1
Feature usage info:
Users of QNX_SE: (Total of 1 license available)
Users of QNX_PE: (Total of 1 license available)
and the Server Diags shows this:Diagnostics
FLEXlm diagnostics on Thu 5/29/2003 06:43
License file: C:\QNXsdk\QNXLicense.lic
“QNX_SE” v620, vendor: qnxlm
License server: MIP-JS
floating license no expiration date
This license can be checked out“QNX_PE” v620, vendor: qnxlm
License server: MIP-JS
floating license no expiration date
This license can be checked out
“Chris McKillop” <> cdm@qnx.com> > wrote in message
news:bb32fk$3ff$> 1@nntp.qnx.com> …
JS <> jsukamtoh@infolink.co.id> > wrote:
I have installed and run flexlm with permanent license. Flexlm
diagnostic
shows no error. But when I run IDE and try to create a new C project,
it
displays Installation Error message “QNX SDK has not been installed
or
there
is a licensing problem”. When I click OK to continue, the
Architecture
tab
is empty. During installation, I select to install x86 only. Can
anyone
tell
me what could be wrong here? Thanks.
If you open the FlexLM configuration app and go to the “Server Status”
tab and click the Perform Status Inquery button, do you get output that
shows both QNX_SE and QNX_PE licenses?chris
–
Chris McKillop <> cdm@qnx.com> > “The faster I go, the behinder I
get.”
Software Engineer, QSSL – Lewis Carroll –
http://qnx.wox.org/
\Chris McKillop <> cdm@qnx.com> > “The faster I go, the behinder I get.”
Software Engineer, QSSL – Lewis Carroll –
http://qnx.wox.org/
Chris, may I know what to check (like list of files, environment variables,
registry, etc.) to verify that the installation process is OK? The QNX
Installer shows successful message when the installation was completed, but
something may have been missing. Where to look for the installation log
file? Thanks.
“Chris McKillop” <cdm@qnx.com> wrote in message
news:bb3tn3$354$1@nntp.qnx.com…
Okay. Now if you open a terminal and attempt to run qcc, what happens?
chris
JS <> jsukamtoh@infolink.co.id> > wrote:
I guess so. Here is what I got:
Status
Flexible License Manager status on Thu 5/29/2003 06:33
[Detecting lmgrd processes…]
License server status: 27000@MIP-JS
License file(s) on MIP-JS: C:\QNXsdk\QNXLicense.lic:MIP-JS: license server UP (MASTER) v8.1
Vendor daemon status (on MIP-JS):
qnxlm: UP v8.1
Feature usage info:
Users of QNX_SE: (Total of 1 license available)
Users of QNX_PE: (Total of 1 license available)
and the Server Diags shows this:Diagnostics
FLEXlm diagnostics on Thu 5/29/2003 06:43
License file: C:\QNXsdk\QNXLicense.lic
“QNX_SE” v620, vendor: qnxlm
License server: MIP-JS
floating license no expiration date
This license can be checked out“QNX_PE” v620, vendor: qnxlm
License server: MIP-JS
floating license no expiration date
This license can be checked out
“Chris McKillop” <> cdm@qnx.com> > wrote in message
news:bb32fk$3ff$> 1@nntp.qnx.com> …
JS <> jsukamtoh@infolink.co.id> > wrote:
I have installed and run flexlm with permanent license. Flexlm
diagnostic
shows no error. But when I run IDE and try to create a new C project,
it
displays Installation Error message “QNX SDK has not been installed
or
there
is a licensing problem”. When I click OK to continue, the
Architecture
tab
is empty. During installation, I select to install x86 only. Can
anyone
tell
me what could be wrong here? Thanks.
If you open the FlexLM configuration app and go to the “Server Status”
tab and click the Perform Status Inquery button, do you get output that
shows both QNX_SE and QNX_PE licenses?chris
–
Chris McKillop <> cdm@qnx.com> > “The faster I go, the behinder I
get.”
Software Engineer, QSSL – Lewis Carroll –
http://qnx.wox.org/
\Chris McKillop <> cdm@qnx.com> > “The faster I go, the behinder I get.”
Software Engineer, QSSL – Lewis Carroll –
http://qnx.wox.org/
You can post the $QNX_HOST/etc/system/package/session.log* file (the biggest
one is likely the one that was made during your installation) here and we
will look it over for any errors that occurred during installation.
Jerry Chappell
“Johannes” <Jsukamtoh@infolink.co.id> wrote in message
news:bb6bsf$2jj$1@inn.qnx.com…
Chris, may I know what to check (like list of files, environment
variables,
registry, etc.) to verify that the installation process is OK? The QNX
Installer shows successful message when the installation was completed,
but
something may have been missing. Where to look for the installation log
file? Thanks.
Here is the content of session.log:
10:39:46 STATUS: Log file started on 2003-05-29
10:39:46 STATUS: Session started by the qnxinstall 1.0 (win32) using
libpackage 2.2
10:39:46 STATUS: Created temporary directory
(C:\DOCUME~1\User\LOCALS~1\Temp\plib000041)
10:39:46 STATUS: Existing environment variable
(QNX_HOST=C:\QNXsdk\host\win32\x86)
10:39:46 STATUS: Existing environment variable
(QNX_TARGET=C:\QNXsdk\target\qnx6)
10:39:46 STATUS: Existing environment variable
(PATH=%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;C:\QNXsd
k\host\win32\x86\usr\bin;C:\QNXsdk\host\win32\x86\usr\bin\cygwin_dll)
10:39:46 STATUS: Topics file not installed and will not be used
(C:\QNXsdk\host\win32\x86\target\qnx6\usr\share\package\topics.xml)
10:39:46 STATUS: Loaded installed QPF file
(C:/QNXsdk/host/win32/x86/etc/system/package/packages)
10:39:46 STATUS: Loading installed QRM
(C:/QNXsdk/host/win32/x86/pkgs/repository/host/win32)
10:39:46 STATUS: Opening installed repository… (“Host Repository
(Windows)” at C:/QNXsdk/host/win32/x86/pkgs/repository/host/win32)
10:39:46 STATUS: Saving installed QRM to
C:\QNXsdk\host\win32\x86\etc\system\package\installed\a680c89cd4b9341cfb316c
fb8b1f7ace.qrm (“Host Repository (Windows)” at
C:/QNXsdk/host/win32/x86/pkgs/repository/host/win32)
10:39:46 STATUS: Installed repository has been parsed (24 packages)
10:39:46 STATUS: Loading installed QRM
(C:/QNXsdk/host/win32/x86/pkgs/repository/target/qnx6)
10:39:46 STATUS: Opening installed repository… (“Target Repository
(Neutrino)” at C:/QNXsdk/host/win32/x86/pkgs/repository/target/qnx6)
10:39:47 STATUS: Saving installed QRM to
C:\QNXsdk\host\win32\x86\etc\system\package\installed\e0c09735754f01da722547
23188b2626.qrm (“Target Repository (Neutrino)” at
C:/QNXsdk/host/win32/x86/pkgs/repository/target/qnx6)
10:39:47 STATUS: Installed repository has been parsed (94 packages)
10:39:47 STATUS: Opening installed repository… (“Host Repository
(Neutrino)” at C:/QNXsdk/host/win32/x86/pkgs/repository/host/qnx6)
10:39:47 STATUS: Installed repository has been parsed (0 packages)
10:39:47 STATUS: Opening installed repository… (“Host Repository
(Solaris)” at C:/QNXsdk/host/win32/x86/pkgs/repository/host/solaris)
10:39:47 STATUS: Installed repository has been parsed (0 packages)
10:39:47 STATUS: Loaded installed QPF file
(C:/QNXsdk/host/win32/x86/etc/system/package/packages)
10:40:31 STATUS: Created temporary directory
(C:\DOCUME~1\User\LOCALS~1\Temp\plib006334)
10:40:46 STATUS: Loading remote QRM (“IDE_620AIDE.QPR” at
X:/Public/Neutrino Patch/IDE_620AIDE.QPR)
10:40:47 STATUS: Opening repository… (“QNX IDE Patch A” at
X:/Public/Neutrino Patch/IDE_620AIDE.QPR)
10:40:47 STATUS: Created temporary directory
(C:\DOCUME~1\User\LOCALS~1\Temp\plib026500)
10:41:16 STATUS: Repository has been opened (91 packages)
10:41:16 STATUS: Saving remote QRM to
C:\QNXsdk\host\win32\x86\etc\system\package\sources.qrm (“QNX IDE Patch A”
at X:/Public/Neutrino Patch/IDE_620AIDE.QPR)
10:41:26 STATUS: Dependency check started…
10:41:26 STATUS: Dependency check completed (fully satisfied)
10:41:34 STATUS: Dependency check started…
10:41:34 STATUS: Dependency check completed (fully satisfied)
10:41:34 STATUS: Actions being performed…
10:41:34 STATUS: Performing preliminary actions in this repository… (“QNX
IDE Patch A” at X:/Public/Neutrino Patch/IDE_620AIDE.QPR)
10:41:34 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib026500\b-winsdk-620aide-6.2.0A-x86-qnx.q
pk] (QNX IDE Patch A 6.2.0A (Windows tool) targeting x86)
10:41:34 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib026500\ide_w-62Aide-6.2.0A-qnx.qpk]
(Eclipse 6.2.0A (win32 tool))
10:41:35 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib026500\ide_w-62Aide-6.2.0A-x86-qnx.qpk]
(Eclipse 6.2.0A (Windows tool))
10:41:35 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib026500\ide_w-62Aide-dev-6.2.0A-qnx.qpk]
(Eclipse Development 6.2.0A (win32 tool))
10:41:35 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib026500\ide_w-62Aide-dev-6.2.0A-x86-qnx.q
pk] (Eclipse Development 6.2.0A (Windows tool))
10:41:35 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib026500\malloc-62Aide-6.2.0A-qnx.qpk]
(malloc 6.2.0A)
10:41:35 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib026500\malloc-62Aide-6.2.0A-x86-qnx.qpk]
(malloc 6.2.0A targeting x86)
10:41:35 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib026500\malloc-62Aide-dev-6.2.0A-qnx.qpk]
(malloc Development 6.2.0A)
10:41:35 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib026500\malloc-62Aide-dev_x86-6.2.0A-qnx.
qpk] (malloc Development 6.2.0A targeting x86)
10:41:35 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib026500\malloc-62Aide-slib-6.2.0A-qnx.qpk
] (malloc shared libraries 6.2.0A)
10:41:35 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib026500\malloc-62Aide-slib-6.2.0A-x86-qnx
…qpk] (malloc shared libraries 6.2.0A targeting x86)
10:41:35 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib026500\qconn-62Aide-6.2.0A-qnx.qpk]
(qconn 6.2.0A)
10:41:36 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib026500\qconn-62Aide-6.2.0A-x86-qnx.qpk]
(qconn 6.2.0A targeting x86)
10:41:36 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib026500\winsdk-62Aide-dev_x86-6.2.0A-qnx.
qpk] (WinSDK Development 6.2.0A (win32 tool) targeting x86)
10:41:36 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib026500\winsdk-62Aide-dev_x86-6.2.0A-x86-
qnx.qpk] (WinSDK Development 6.2.0A (Windows tool) targeting x86)
10:41:36 STATUS: Preliminary actions complete for this repository
10:41:36 STATUS: Generating required QPF files
10:41:36 STATUS: Saving installed QRM to
C:\QNXsdk\host\win32\x86\etc\system\package\installed\a680c89cd4b9341cfb316c
fb8b1f7ace.qrm (“Host Repository (Windows)” at
C:/QNXsdk/host/win32/x86/pkgs/repository/host/win32)
10:41:36 STATUS: Saving installed QRM to
C:\QNXsdk\host\win32\x86\etc\system\package\installed\e0c09735754f01da722547
23188b2626.qrm (“Target Repository (Neutrino)” at
C:/QNXsdk/host/win32/x86/pkgs/repository/target/qnx6)
10:41:36 STATUS: Saved proposed QPF file
(C:/QNXsdk/host/win32/x86/etc/system/package/packages.proposed)
10:41:36 STATUS: Opening QPF
(C:/QNXsdk/host/win32/x86/etc/system/package/packages)
10:41:36 STATUS: Parsing QPF file(s)
10:41:36 STATUS: Parsing QPM file(s)
10:41:38 STATUS: Opening QPF
(C:/QNXsdk/host/win32/x86/etc/system/package/packages.proposed)
10:41:38 STATUS: Parsing QPF file(s)
10:41:38 STATUS: Parsing QPM file(s)
10:41:38 STATUS: Comparing QPF files
(C:/QNXsdk/host/win32/x86/etc/system/package/packages vs.
C:/QNXsdk/host/win32/x86/etc/system/package/packages.proposed)
10:41:38 STATUS: Comparing individual files
10:41:38 STATUS: Spilled file detected for
C:/QNXsdk/host/win32/x86/usr/Eclipse/install/install.properties (at
C:/QNXsdk/host/win32/x86/usr/Eclipse/install/install.properties)
10:41:46 STATUS: Spilled file detected for
C:/QNXsdk/host/win32/x86/usr/Eclipse/plugins/com.qnx.tools.ide.doc.user/src/
com/qnx/tools/ide/doc/user (at
C:/QNXsdk/host/win32/x86/usr/Eclipse/plugins/com.qnx.tools.ide.doc.user/src/
com/qnx/tools/ide/doc/user)
10:41:56 STATUS: Spilled file detected for
C:/QNXsdk/target/qnx6/x86/usr/lib/libmalloc_g.so (at
C:/QNXsdk/target/qnx6/x86/usr/lib/libmalloc_g.so)
10:42:52 STATUS: Locating required packages
10:42:52 STATUS: Package summary complete (0, 7)
10:42:52 STATUS: Created temporary directory
(C:\DOCUME~1\User\LOCALS~1\Temp\plib000732)
10:42:57 STATUS: Committing files to disk
10:43:14 WARNING: Not found in QPK
(C:/QNXsdk/host/win32/x86/usr/Eclipse/plugins/com.qnx.tools.ide.doc.user/src
/com/qnx/tools/ide/doc/user)
10:43:14 STATUS: Applying unions and symlinks
10:43:14 STATUS: Saved proposed QPF as current
(C:/QNXsdk/host/win32/x86/etc/system/package/packages)
10:43:14 STATUS: Post commit for kept original files
10:43:14 STATUS: Action for QNX IDE Patch A 6.2.0A (Windows tool) targeting
x86 (has been successfully installed)
10:43:14 STATUS: Action for Eclipse 6.2.0A (win32 tool) (has been
successfully installed)
10:43:14 STATUS: Action for Eclipse 6.2.0A (Windows tool) (has been
successfully installed)
10:43:14 STATUS: Action for Eclipse Development 6.2.0A (win32 tool) (has
been successfully installed)
10:43:14 STATUS: Action for Eclipse Development 6.2.0A (Windows tool) (has
been successfully installed)
10:43:14 STATUS: Action for malloc 6.2.0A (has been successfully installed)
10:43:14 STATUS: Action for malloc 6.2.0A targeting x86 (has been
successfully installed)
10:43:14 STATUS: Action for malloc Development 6.2.0A (has been
successfully installed)
10:43:14 STATUS: Action for malloc Development 6.2.0A targeting x86 (has
been successfully installed)
10:43:14 STATUS: Action for malloc shared libraries 6.2.0A (has been
successfully installed)
10:43:14 STATUS: Action for malloc shared libraries 6.2.0A targeting x86
(has been successfully installed)
10:43:14 STATUS: Action for qconn 6.2.0A (has been successfully installed)
10:43:14 STATUS: Action for qconn 6.2.0A targeting x86 (has been
successfully installed)
10:43:14 STATUS: Action for WinSDK Development 6.2.0A (win32 tool)
targeting x86 (has been successfully installed)
10:43:14 STATUS: Action for WinSDK Development 6.2.0A (Windows tool)
targeting x86 (has been successfully installed)
10:43:14 STATUS: Saving installed QRM to
C:\QNXsdk\host\win32\x86\etc\system\package\installed\a680c89cd4b9341cfb316c
fb8b1f7ace.qrm (“Host Repository (Windows)” at
C:/QNXsdk/host/win32/x86/pkgs/repository/host/win32)
10:43:14 STATUS: Saving installed QRM to
C:\QNXsdk\host\win32\x86\etc\system\package\installed\e0c09735754f01da722547
23188b2626.qrm (“Target Repository (Neutrino)” at
C:/QNXsdk/host/win32/x86/pkgs/repository/target/qnx6)
10:43:14 STATUS: Actions completed
10:43:14 STATUS: Actions successfully completed.
10:50:12 STATUS: Created temporary directory
(C:\DOCUME~1\User\LOCALS~1\Temp\plib000851)
10:50:12 STATUS: Opening repository… (“SUPRUN.QPR” at X:/Public/Neutrino
Patch/SUPRUN.QPR)
10:50:13 STATUS: Created temporary directory
(C:\DOCUME~1\User\LOCALS~1\Temp\plib014386)
10:50:14 STATUS: Repository has been opened (45 packages)
10:50:14 STATUS: Saving remote QRM to
C:\QNXsdk\host\win32\x86\etc\system\package\sources.qrm (“SUPRUN.QPR” at
X:/Public/Neutrino Patch/SUPRUN.QPR)
10:50:33 STATUS: Dependency check started…
10:50:33 STATUS: Dependency check completed (fully satisfied)
10:50:37 STATUS: Actions being performed…
10:50:37 STATUS: Performing preliminary actions in this repository… (“QNX
IDE Patch A” at X:/Public/Neutrino Patch/IDE_620AIDE.QPR)
10:50:37 STATUS: Preliminary actions complete for this repository
10:50:37 STATUS: Performing preliminary actions in this repository…
(“SUPRUN.QPR” at X:/Public/Neutrino Patch/SUPRUN.QPR)
10:50:37 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib014386\b-suprun-winsdk-6.2.0-x86-qnx.qpk
] (Supplementary Run-time Package 6.2.0 (win32 tool) targeting x86)
10:50:37 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib014386\hat-1.1.0-qnx.qpk] (High
Availability Toolkit 1.1.0)
10:50:37 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib014386\hat-1.1.0-x86-qnx.qpk] (High
Availability Toolkit 1.1.0 targeting x86)
10:50:37 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib014386\hat_x86-1.1.0-qnx.qpk] (High
Availability Toolkit 1.1.0 targeting x86)
10:50:37 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib014386\suprun-6.2.0-qnx.qpk]
(Supplementary Runtime 6.2.0)
10:50:37 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib014386\suprun-6.2.0-x86-qnx.qpk]
(Supplementary Runtime 6.2.0 targeting x86)
10:50:37 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib014386\suprun-drivers-6.2.0-qnx.qpk]
(Runtime Drivers 6.2.0)
10:50:37 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib014386\suprun-drivers-6.2.0-x86-qnx.qpk]
(Runtime Drivers 6.2.0 targeting x86)
10:50:37 STATUS: Preliminary actions complete for this repository
10:50:37 STATUS: Generating required QPF files
10:50:37 STATUS: Saving installed QRM to
C:\QNXsdk\host\win32\x86\etc\system\package\installed\a680c89cd4b9341cfb316c
fb8b1f7ace.qrm (“Host Repository (Windows)” at
C:/QNXsdk/host/win32/x86/pkgs/repository/host/win32)
10:50:37 STATUS: Saving installed QRM to
C:\QNXsdk\host\win32\x86\etc\system\package\installed\e0c09735754f01da722547
23188b2626.qrm (“Target Repository (Neutrino)” at
C:/QNXsdk/host/win32/x86/pkgs/repository/target/qnx6)
10:50:37 STATUS: Saved proposed QPF file
(C:/QNXsdk/host/win32/x86/etc/system/package/packages.proposed)
10:50:37 STATUS: Opening QPF
(C:/QNXsdk/host/win32/x86/etc/system/package/packages)
10:50:37 STATUS: Parsing QPF file(s)
10:50:37 STATUS: Parsing QPM file(s)
10:50:38 STATUS: Opening QPF
(C:/QNXsdk/host/win32/x86/etc/system/package/packages.proposed)
10:50:38 STATUS: Parsing QPF file(s)
10:50:38 STATUS: Parsing QPM file(s)
10:50:38 STATUS: Comparing QPF files
(C:/QNXsdk/host/win32/x86/etc/system/package/packages vs.
C:/QNXsdk/host/win32/x86/etc/system/package/packages.proposed)
10:50:38 STATUS: Comparing individual files
10:50:43 STATUS: Locating required packages
10:50:43 STATUS: Package summary complete (0, 6)
10:50:44 STATUS: Created temporary directory
(C:\DOCUME~1\User\LOCALS~1\Temp\plib017786)
10:50:44 STATUS: Committing files to disk
10:50:45 STATUS: Applying unions and symlinks
10:50:45 STATUS: Saved proposed QPF as current
(C:/QNXsdk/host/win32/x86/etc/system/package/packages)
10:50:45 STATUS: Post commit for kept original files
10:50:45 STATUS: Action for Supplementary Run-time Package 6.2.0 (win32
tool) targeting x86 (has been successfully installed)
10:50:45 STATUS: Action for High Availability Toolkit 1.1.0 (has been
successfully installed)
10:50:45 STATUS: Action for High Availability Toolkit 1.1.0 targeting x86
(has been successfully installed)
10:50:45 STATUS: Action for High Availability Toolkit 1.1.0 targeting x86
(has been successfully installed)
10:50:45 STATUS: Action for Supplementary Runtime 6.2.0 (has been
successfully installed)
10:50:45 STATUS: Action for Supplementary Runtime 6.2.0 targeting x86 (has
been successfully installed)
10:50:45 STATUS: Action for Runtime Drivers 6.2.0 (has been successfully
installed)
10:50:45 STATUS: Action for Runtime Drivers 6.2.0 targeting x86 (has been
successfully installed)
10:50:45 STATUS: Saving installed QRM to
C:\QNXsdk\host\win32\x86\etc\system\package\installed\a680c89cd4b9341cfb316c
fb8b1f7ace.qrm (“Host Repository (Windows)” at
C:/QNXsdk/host/win32/x86/pkgs/repository/host/win32)
10:50:45 STATUS: Saving installed QRM to
C:\QNXsdk\host\win32\x86\etc\system\package\installed\e0c09735754f01da722547
23188b2626.qrm (“Target Repository (Neutrino)” at
C:/QNXsdk/host/win32/x86/pkgs/repository/target/qnx6)
10:50:45 STATUS: Actions completed
10:50:45 STATUS: Actions successfully completed.
10:51:17 STATUS: Created temporary directory
(C:\DOCUME~1\User\LOCALS~1\Temp\plib028134)
10:51:21 STATUS: Opening repository… (“PATCHA_PE.QPR” at
X:/Public/Neutrino Patch/PATCHA_PE.QPR)
10:51:21 STATUS: Created temporary directory
(C:\DOCUME~1\User\LOCALS~1\Temp\plib018440)
10:51:26 STATUS: Repository has been opened (79 packages)
10:51:27 STATUS: Saving remote QRM to
C:\QNXsdk\host\win32\x86\etc\system\package\sources.qrm (“PATCHA_PE.QPR” at
X:/Public/Neutrino Patch/PATCHA_PE.QPR)
10:51:30 STATUS: Dependency check started…
10:51:30 STATUS: Dependency check completed (fully satisfied)
10:51:34 STATUS: Actions being performed…
10:51:34 STATUS: Performing preliminary actions in this repository… (“QNX
IDE Patch A” at X:/Public/Neutrino Patch/IDE_620AIDE.QPR)
10:51:34 STATUS: Preliminary actions complete for this repository
10:51:34 STATUS: Performing preliminary actions in this repository…
(“SUPRUN.QPR” at X:/Public/Neutrino Patch/SUPRUN.QPR)
10:51:34 STATUS: Preliminary actions complete for this repository
10:51:34 STATUS: Performing preliminary actions in this repository…
(“PATCHA_PE.QPR” at X:/Public/Neutrino Patch/PATCHA_PE.QPR)
10:51:34 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib018440\audio-ddk-upd-6.2.0A-qnx.qpk]
(Audio DDK 6.2.0A)
10:51:34 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib018440\b-os-pe-winsdk-6.2.0A-x86-qnx.qpk
] (QNX Momentics PE 6.2.0A (Windows tool) targeting x86)
10:51:34 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib018440\b-os-se-winsdk-6.2.0A-x86-qnx.qpk
] (QNX Momentics SE 6.2.0A (Windows tool) targeting x86)
10:51:34 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib018440\os-update-2.1.3A-qnx.qpk] (QNX
Neutrino OS 2.1.3A)
10:51:34 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib018440\os-update-2.1.3A-x86-qnx.qpk]
(QNX Neutrino OS 2.1.3A targeting x86)
10:51:34 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib018440\os-update-drivers-2.1.3A-qnx.qpk]
(QNX Neutrino OS Device Drivers 2.1.3A)
10:51:34 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib018440\os-update-drivers-2.1.3A-x86-qnx.
qpk] (QNX Neutrino OS Device Drivers 2.1.3A targeting x86)
10:51:34 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib018440\ph-update-2.0.3A-qnx.qpk] (QNX
Photon 2.0.3A)
10:51:34 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib018440\ph-update-2.0.3A-x86-qnx.qpk]
(QNX Photon 2.0.3A targeting x86)
10:51:35 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib018440\ph-update-dev_x86-2.0.3A-qnx.qpk]
(QNX Photon Development 2.0.3A targeting x86)
10:51:35 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib018440\winsdk-update-1.1.1A-qnx.qpk]
(WinSDK 1.1.1A (win32 tool))
10:51:35 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib018440\winsdk-update-1.1.1A-x86-qnx.qpk]
(WinSDK 1.1.1A (Windows tool))
10:51:35 STATUS: Preliminary actions complete for this repository
10:51:35 STATUS: Generating required QPF files
10:51:35 STATUS: Saving installed QRM to
C:\QNXsdk\host\win32\x86\etc\system\package\installed\a680c89cd4b9341cfb316c
fb8b1f7ace.qrm (“Host Repository (Windows)” at
C:/QNXsdk/host/win32/x86/pkgs/repository/host/win32)
10:51:35 STATUS: Saving installed QRM to
C:\QNXsdk\host\win32\x86\etc\system\package\installed\e0c09735754f01da722547
23188b2626.qrm (“Target Repository (Neutrino)” at
C:/QNXsdk/host/win32/x86/pkgs/repository/target/qnx6)
10:51:35 STATUS: Saved proposed QPF file
(C:/QNXsdk/host/win32/x86/etc/system/package/packages.proposed)
10:51:35 STATUS: Opening QPF
(C:/QNXsdk/host/win32/x86/etc/system/package/packages)
10:51:35 STATUS: Parsing QPF file(s)
10:51:35 STATUS: Parsing QPM file(s)
10:51:36 STATUS: Opening QPF
(C:/QNXsdk/host/win32/x86/etc/system/package/packages.proposed)
10:51:36 STATUS: Parsing QPF file(s)
10:51:36 STATUS: Parsing QPM file(s)
10:51:36 STATUS: Comparing QPF files
(C:/QNXsdk/host/win32/x86/etc/system/package/packages vs.
C:/QNXsdk/host/win32/x86/etc/system/package/packages.proposed)
10:51:36 STATUS: Comparing individual files
10:51:39 STATUS: Spilled file detected for
C:/QNXsdk/target/qnx6/x86/usr/sbin/fs-cifs (at
C:/QNXsdk/target/qnx6/x86/usr/sbin/fs-cifs)
10:51:39 STATUS: Spilled file detected for
C:/QNXsdk/target/qnx6/x86/sbin/fs-pkg (at
C:/QNXsdk/target/qnx6/x86/sbin/fs-pkg)
10:52:20 STATUS: Locating required packages
10:52:20 STATUS: Package summary complete (0, 6)
10:52:21 STATUS: Created temporary directory
(C:\DOCUME~1\User\LOCALS~1\Temp\plib013024)
10:52:21 STATUS: Committing files to disk
10:52:23 STATUS: Applying unions and symlinks
10:52:23 STATUS: Saved proposed QPF as current
(C:/QNXsdk/host/win32/x86/etc/system/package/packages)
10:52:23 STATUS: Post commit for kept original files
10:52:23 STATUS: Action for Audio DDK 6.2.0A (has been successfully
installed)
10:52:23 STATUS: Action for QNX Momentics PE 6.2.0A (Windows tool)
targeting x86 (has been successfully installed)
10:52:23 STATUS: Action for QNX Momentics SE 6.2.0A (Windows tool)
targeting x86 (has been successfully installed)
10:52:23 STATUS: Action for QNX Neutrino OS 2.1.3A (has been successfully
installed)
10:52:23 STATUS: Action for QNX Neutrino OS 2.1.3A targeting x86 (has been
successfully installed)
10:52:23 STATUS: Action for QNX Neutrino OS Device Drivers 2.1.3A (has been
successfully installed)
10:52:23 STATUS: Action for QNX Neutrino OS Device Drivers 2.1.3A targeting
x86 (has been successfully installed)
10:52:23 STATUS: Action for QNX Photon 2.0.3A (has been successfully
installed)
10:52:23 STATUS: Action for QNX Photon 2.0.3A targeting x86 (has been
successfully installed)
10:52:23 STATUS: Action for QNX Photon Development 2.0.3A targeting x86
(has been successfully installed)
10:52:23 STATUS: Action for WinSDK 1.1.1A (win32 tool) (has been
successfully installed)
10:52:23 STATUS: Action for WinSDK 1.1.1A (Windows tool) (has been
successfully installed)
10:52:23 STATUS: Saving installed QRM to
C:\QNXsdk\host\win32\x86\etc\system\package\installed\e0c09735754f01da722547
23188b2626.qrm (“Target Repository (Neutrino)” at
C:/QNXsdk/host/win32/x86/pkgs/repository/target/qnx6)
10:52:23 STATUS: Saving installed QRM to
C:\QNXsdk\host\win32\x86\etc\system\package\installed\a680c89cd4b9341cfb316c
fb8b1f7ace.qrm (“Host Repository (Windows)” at
C:/QNXsdk/host/win32/x86/pkgs/repository/host/win32)
10:52:23 STATUS: Actions completed
10:52:23 STATUS: Actions successfully completed.
10:53:18 STATUS: Removed temporary directory
(C:/DOCUME~1/User/LOCALS~1/Temp/plib006334)
10:53:18 STATUS: Removed temporary directory
(C:/DOCUME~1/User/LOCALS~1/Temp/plib026500)
10:53:18 STATUS: Removed temporary directory
(C:/DOCUME~1/User/LOCALS~1/Temp/plib000732)
10:53:18 STATUS: Removed temporary directory
(C:/DOCUME~1/User/LOCALS~1/Temp/plib000851)
10:53:19 STATUS: Removed temporary directory
(C:/DOCUME~1/User/LOCALS~1/Temp/plib014386)
10:53:19 STATUS: Removed temporary directory
(C:/DOCUME~1/User/LOCALS~1/Temp/plib017786)
10:53:19 STATUS: Removed temporary directory
(C:/DOCUME~1/User/LOCALS~1/Temp/plib028134)
10:53:19 STATUS: Removed temporary directory
(C:/DOCUME~1/User/LOCALS~1/Temp/plib018440)
10:53:19 STATUS: Removed temporary directory
(C:/DOCUME~1/User/LOCALS~1/Temp/plib013024)
10:53:19 STATUS: Removed temporary directory
(C:/DOCUME~1/User/LOCALS~1/Temp/plib000041)
10:53:19 STATUS: Session closed
10:53:19 STATUS: Log file closed on 2003-05-29
“Jerry Chappell” <jchappell@qnx.com> wrote in message
news:bb7js4$gkp$1@nntp.qnx.com…
You can post the $QNX_HOST/etc/system/package/session.log* file (the
biggest
one is likely the one that was made during your installation) here and we
will look it over for any errors that occurred during installation.Jerry Chappell
“Johannes” <> Jsukamtoh@infolink.co.id> > wrote in message
news:bb6bsf$2jj$> 1@inn.qnx.com> …
Chris, may I know what to check (like list of files, environment
variables,
registry, etc.) to verify that the installation process is OK? The QNX
Installer shows successful message when the installation was completed,
but
something may have been missing. Where to look for the installation log
file? Thanks.
Here is the content of my latest session.log. I have tried to re-install:
10:39:46 STATUS: Log file started on 2003-05-29
10:39:46 STATUS: Session started by the qnxinstall 1.0 (win32) using
libpackage 2.2
10:39:46 STATUS: Created temporary directory
(C:\DOCUME~1\User\LOCALS~1\Temp\plib000041)
10:39:46 STATUS: Existing environment variable
(QNX_HOST=C:\QNXsdk\host\win32\x86)
10:39:46 STATUS: Existing environment variable
(QNX_TARGET=C:\QNXsdk\target\qnx6)
10:39:46 STATUS: Existing environment variable
(PATH=%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;C:\QNXsd
k\host\win32\x86\usr\bin;C:\QNXsdk\host\win32\x86\usr\bin\cygwin_dll)
10:39:46 STATUS: Topics file not installed and will not be used
(C:\QNXsdk\host\win32\x86\target\qnx6\usr\share\package\topics.xml)
10:39:46 STATUS: Loaded installed QPF file
(C:/QNXsdk/host/win32/x86/etc/system/package/packages)
10:39:46 STATUS: Loading installed QRM
(C:/QNXsdk/host/win32/x86/pkgs/repository/host/win32)
10:39:46 STATUS: Opening installed repository… (“Host Repository
(Windows)” at C:/QNXsdk/host/win32/x86/pkgs/repository/host/win32)
10:39:46 STATUS: Saving installed QRM to
C:\QNXsdk\host\win32\x86\etc\system\package\installed\a680c89cd4b9341cfb316c
fb8b1f7ace.qrm (“Host Repository (Windows)” at
C:/QNXsdk/host/win32/x86/pkgs/repository/host/win32)
10:39:46 STATUS: Installed repository has been parsed (24 packages)
10:39:46 STATUS: Loading installed QRM
(C:/QNXsdk/host/win32/x86/pkgs/repository/target/qnx6)
10:39:46 STATUS: Opening installed repository… (“Target Repository
(Neutrino)” at C:/QNXsdk/host/win32/x86/pkgs/repository/target/qnx6)
10:39:47 STATUS: Saving installed QRM to
C:\QNXsdk\host\win32\x86\etc\system\package\installed\e0c09735754f01da722547
23188b2626.qrm (“Target Repository (Neutrino)” at
C:/QNXsdk/host/win32/x86/pkgs/repository/target/qnx6)
10:39:47 STATUS: Installed repository has been parsed (94 packages)
10:39:47 STATUS: Opening installed repository… (“Host Repository
(Neutrino)” at C:/QNXsdk/host/win32/x86/pkgs/repository/host/qnx6)
10:39:47 STATUS: Installed repository has been parsed (0 packages)
10:39:47 STATUS: Opening installed repository… (“Host Repository
(Solaris)” at C:/QNXsdk/host/win32/x86/pkgs/repository/host/solaris)
10:39:47 STATUS: Installed repository has been parsed (0 packages)
10:39:47 STATUS: Loaded installed QPF file
(C:/QNXsdk/host/win32/x86/etc/system/package/packages)
10:40:31 STATUS: Created temporary directory
(C:\DOCUME~1\User\LOCALS~1\Temp\plib006334)
10:40:46 STATUS: Loading remote QRM (“IDE_620AIDE.QPR” at
X:/Public/Neutrino Patch/IDE_620AIDE.QPR)
10:40:47 STATUS: Opening repository… (“QNX IDE Patch A” at
X:/Public/Neutrino Patch/IDE_620AIDE.QPR)
10:40:47 STATUS: Created temporary directory
(C:\DOCUME~1\User\LOCALS~1\Temp\plib026500)
10:41:16 STATUS: Repository has been opened (91 packages)
10:41:16 STATUS: Saving remote QRM to
C:\QNXsdk\host\win32\x86\etc\system\package\sources.qrm (“QNX IDE Patch A”
at X:/Public/Neutrino Patch/IDE_620AIDE.QPR)
10:41:26 STATUS: Dependency check started…
10:41:26 STATUS: Dependency check completed (fully satisfied)
10:41:34 STATUS: Dependency check started…
10:41:34 STATUS: Dependency check completed (fully satisfied)
10:41:34 STATUS: Actions being performed…
10:41:34 STATUS: Performing preliminary actions in this repository… (“QNX
IDE Patch A” at X:/Public/Neutrino Patch/IDE_620AIDE.QPR)
10:41:34 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib026500\b-winsdk-620aide-6.2.0A-x86-qnx.q
pk] (QNX IDE Patch A 6.2.0A (Windows tool) targeting x86)
10:41:34 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib026500\ide_w-62Aide-6.2.0A-qnx.qpk]
(Eclipse 6.2.0A (win32 tool))
10:41:35 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib026500\ide_w-62Aide-6.2.0A-x86-qnx.qpk]
(Eclipse 6.2.0A (Windows tool))
10:41:35 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib026500\ide_w-62Aide-dev-6.2.0A-qnx.qpk]
(Eclipse Development 6.2.0A (win32 tool))
10:41:35 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib026500\ide_w-62Aide-dev-6.2.0A-x86-qnx.q
pk] (Eclipse Development 6.2.0A (Windows tool))
10:41:35 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib026500\malloc-62Aide-6.2.0A-qnx.qpk]
(malloc 6.2.0A)
10:41:35 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib026500\malloc-62Aide-6.2.0A-x86-qnx.qpk]
(malloc 6.2.0A targeting x86)
10:41:35 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib026500\malloc-62Aide-dev-6.2.0A-qnx.qpk]
(malloc Development 6.2.0A)
10:41:35 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib026500\malloc-62Aide-dev_x86-6.2.0A-qnx.
qpk] (malloc Development 6.2.0A targeting x86)
10:41:35 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib026500\malloc-62Aide-slib-6.2.0A-qnx.qpk
] (malloc shared libraries 6.2.0A)
10:41:35 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib026500\malloc-62Aide-slib-6.2.0A-x86-qnx
…qpk] (malloc shared libraries 6.2.0A targeting x86)
10:41:35 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib026500\qconn-62Aide-6.2.0A-qnx.qpk]
(qconn 6.2.0A)
10:41:36 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib026500\qconn-62Aide-6.2.0A-x86-qnx.qpk]
(qconn 6.2.0A targeting x86)
10:41:36 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib026500\winsdk-62Aide-dev_x86-6.2.0A-qnx.
qpk] (WinSDK Development 6.2.0A (win32 tool) targeting x86)
10:41:36 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib026500\winsdk-62Aide-dev_x86-6.2.0A-x86-
qnx.qpk] (WinSDK Development 6.2.0A (Windows tool) targeting x86)
10:41:36 STATUS: Preliminary actions complete for this repository
10:41:36 STATUS: Generating required QPF files
10:41:36 STATUS: Saving installed QRM to
C:\QNXsdk\host\win32\x86\etc\system\package\installed\a680c89cd4b9341cfb316c
fb8b1f7ace.qrm (“Host Repository (Windows)” at
C:/QNXsdk/host/win32/x86/pkgs/repository/host/win32)
10:41:36 STATUS: Saving installed QRM to
C:\QNXsdk\host\win32\x86\etc\system\package\installed\e0c09735754f01da722547
23188b2626.qrm (“Target Repository (Neutrino)” at
C:/QNXsdk/host/win32/x86/pkgs/repository/target/qnx6)
10:41:36 STATUS: Saved proposed QPF file
(C:/QNXsdk/host/win32/x86/etc/system/package/packages.proposed)
10:41:36 STATUS: Opening QPF
(C:/QNXsdk/host/win32/x86/etc/system/package/packages)
10:41:36 STATUS: Parsing QPF file(s)
10:41:36 STATUS: Parsing QPM file(s)
10:41:38 STATUS: Opening QPF
(C:/QNXsdk/host/win32/x86/etc/system/package/packages.proposed)
10:41:38 STATUS: Parsing QPF file(s)
10:41:38 STATUS: Parsing QPM file(s)
10:41:38 STATUS: Comparing QPF files
(C:/QNXsdk/host/win32/x86/etc/system/package/packages vs.
C:/QNXsdk/host/win32/x86/etc/system/package/packages.proposed)
10:41:38 STATUS: Comparing individual files
10:41:38 STATUS: Spilled file detected for
C:/QNXsdk/host/win32/x86/usr/Eclipse/install/install.properties (at
C:/QNXsdk/host/win32/x86/usr/Eclipse/install/install.properties)
10:41:46 STATUS: Spilled file detected for
C:/QNXsdk/host/win32/x86/usr/Eclipse/plugins/com.qnx.tools.ide.doc.user/src/
com/qnx/tools/ide/doc/user (at
C:/QNXsdk/host/win32/x86/usr/Eclipse/plugins/com.qnx.tools.ide.doc.user/src/
com/qnx/tools/ide/doc/user)
10:41:56 STATUS: Spilled file detected for
C:/QNXsdk/target/qnx6/x86/usr/lib/libmalloc_g.so (at
C:/QNXsdk/target/qnx6/x86/usr/lib/libmalloc_g.so)
10:42:52 STATUS: Locating required packages
10:42:52 STATUS: Package summary complete (0, 7)
10:42:52 STATUS: Created temporary directory
(C:\DOCUME~1\User\LOCALS~1\Temp\plib000732)
10:42:57 STATUS: Committing files to disk
10:43:14 WARNING: Not found in QPK
(C:/QNXsdk/host/win32/x86/usr/Eclipse/plugins/com.qnx.tools.ide.doc.user/src
/com/qnx/tools/ide/doc/user)
10:43:14 STATUS: Applying unions and symlinks
10:43:14 STATUS: Saved proposed QPF as current
(C:/QNXsdk/host/win32/x86/etc/system/package/packages)
10:43:14 STATUS: Post commit for kept original files
10:43:14 STATUS: Action for QNX IDE Patch A 6.2.0A (Windows tool) targeting
x86 (has been successfully installed)
10:43:14 STATUS: Action for Eclipse 6.2.0A (win32 tool) (has been
successfully installed)
10:43:14 STATUS: Action for Eclipse 6.2.0A (Windows tool) (has been
successfully installed)
10:43:14 STATUS: Action for Eclipse Development 6.2.0A (win32 tool) (has
been successfully installed)
10:43:14 STATUS: Action for Eclipse Development 6.2.0A (Windows tool) (has
been successfully installed)
10:43:14 STATUS: Action for malloc 6.2.0A (has been successfully installed)
10:43:14 STATUS: Action for malloc 6.2.0A targeting x86 (has been
successfully installed)
10:43:14 STATUS: Action for malloc Development 6.2.0A (has been
successfully installed)
10:43:14 STATUS: Action for malloc Development 6.2.0A targeting x86 (has
been successfully installed)
10:43:14 STATUS: Action for malloc shared libraries 6.2.0A (has been
successfully installed)
10:43:14 STATUS: Action for malloc shared libraries 6.2.0A targeting x86
(has been successfully installed)
10:43:14 STATUS: Action for qconn 6.2.0A (has been successfully installed)
10:43:14 STATUS: Action for qconn 6.2.0A targeting x86 (has been
successfully installed)
10:43:14 STATUS: Action for WinSDK Development 6.2.0A (win32 tool)
targeting x86 (has been successfully installed)
10:43:14 STATUS: Action for WinSDK Development 6.2.0A (Windows tool)
targeting x86 (has been successfully installed)
10:43:14 STATUS: Saving installed QRM to
C:\QNXsdk\host\win32\x86\etc\system\package\installed\a680c89cd4b9341cfb316c
fb8b1f7ace.qrm (“Host Repository (Windows)” at
C:/QNXsdk/host/win32/x86/pkgs/repository/host/win32)
10:43:14 STATUS: Saving installed QRM to
C:\QNXsdk\host\win32\x86\etc\system\package\installed\e0c09735754f01da722547
23188b2626.qrm (“Target Repository (Neutrino)” at
C:/QNXsdk/host/win32/x86/pkgs/repository/target/qnx6)
10:43:14 STATUS: Actions completed
10:43:14 STATUS: Actions successfully completed.
10:50:12 STATUS: Created temporary directory
(C:\DOCUME~1\User\LOCALS~1\Temp\plib000851)
10:50:12 STATUS: Opening repository… (“SUPRUN.QPR” at X:/Public/Neutrino
Patch/SUPRUN.QPR)
10:50:13 STATUS: Created temporary directory
(C:\DOCUME~1\User\LOCALS~1\Temp\plib014386)
10:50:14 STATUS: Repository has been opened (45 packages)
10:50:14 STATUS: Saving remote QRM to
C:\QNXsdk\host\win32\x86\etc\system\package\sources.qrm (“SUPRUN.QPR” at
X:/Public/Neutrino Patch/SUPRUN.QPR)
10:50:33 STATUS: Dependency check started…
10:50:33 STATUS: Dependency check completed (fully satisfied)
10:50:37 STATUS: Actions being performed…
10:50:37 STATUS: Performing preliminary actions in this repository… (“QNX
IDE Patch A” at X:/Public/Neutrino Patch/IDE_620AIDE.QPR)
10:50:37 STATUS: Preliminary actions complete for this repository
10:50:37 STATUS: Performing preliminary actions in this repository…
(“SUPRUN.QPR” at X:/Public/Neutrino Patch/SUPRUN.QPR)
10:50:37 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib014386\b-suprun-winsdk-6.2.0-x86-qnx.qpk
] (Supplementary Run-time Package 6.2.0 (win32 tool) targeting x86)
10:50:37 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib014386\hat-1.1.0-qnx.qpk] (High
Availability Toolkit 1.1.0)
10:50:37 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib014386\hat-1.1.0-x86-qnx.qpk] (High
Availability Toolkit 1.1.0 targeting x86)
10:50:37 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib014386\hat_x86-1.1.0-qnx.qpk] (High
Availability Toolkit 1.1.0 targeting x86)
10:50:37 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib014386\suprun-6.2.0-qnx.qpk]
(Supplementary Runtime 6.2.0)
10:50:37 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib014386\suprun-6.2.0-x86-qnx.qpk]
(Supplementary Runtime 6.2.0 targeting x86)
10:50:37 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib014386\suprun-drivers-6.2.0-qnx.qpk]
(Runtime Drivers 6.2.0)
10:50:37 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib014386\suprun-drivers-6.2.0-x86-qnx.qpk]
(Runtime Drivers 6.2.0 targeting x86)
10:50:37 STATUS: Preliminary actions complete for this repository
10:50:37 STATUS: Generating required QPF files
10:50:37 STATUS: Saving installed QRM to
C:\QNXsdk\host\win32\x86\etc\system\package\installed\a680c89cd4b9341cfb316c
fb8b1f7ace.qrm (“Host Repository (Windows)” at
C:/QNXsdk/host/win32/x86/pkgs/repository/host/win32)
10:50:37 STATUS: Saving installed QRM to
C:\QNXsdk\host\win32\x86\etc\system\package\installed\e0c09735754f01da722547
23188b2626.qrm (“Target Repository (Neutrino)” at
C:/QNXsdk/host/win32/x86/pkgs/repository/target/qnx6)
10:50:37 STATUS: Saved proposed QPF file
(C:/QNXsdk/host/win32/x86/etc/system/package/packages.proposed)
10:50:37 STATUS: Opening QPF
(C:/QNXsdk/host/win32/x86/etc/system/package/packages)
10:50:37 STATUS: Parsing QPF file(s)
10:50:37 STATUS: Parsing QPM file(s)
10:50:38 STATUS: Opening QPF
(C:/QNXsdk/host/win32/x86/etc/system/package/packages.proposed)
10:50:38 STATUS: Parsing QPF file(s)
10:50:38 STATUS: Parsing QPM file(s)
10:50:38 STATUS: Comparing QPF files
(C:/QNXsdk/host/win32/x86/etc/system/package/packages vs.
C:/QNXsdk/host/win32/x86/etc/system/package/packages.proposed)
10:50:38 STATUS: Comparing individual files
10:50:43 STATUS: Locating required packages
10:50:43 STATUS: Package summary complete (0, 6)
10:50:44 STATUS: Created temporary directory
(C:\DOCUME~1\User\LOCALS~1\Temp\plib017786)
10:50:44 STATUS: Committing files to disk
10:50:45 STATUS: Applying unions and symlinks
10:50:45 STATUS: Saved proposed QPF as current
(C:/QNXsdk/host/win32/x86/etc/system/package/packages)
10:50:45 STATUS: Post commit for kept original files
10:50:45 STATUS: Action for Supplementary Run-time Package 6.2.0 (win32
tool) targeting x86 (has been successfully installed)
10:50:45 STATUS: Action for High Availability Toolkit 1.1.0 (has been
successfully installed)
10:50:45 STATUS: Action for High Availability Toolkit 1.1.0 targeting x86
(has been successfully installed)
10:50:45 STATUS: Action for High Availability Toolkit 1.1.0 targeting x86
(has been successfully installed)
10:50:45 STATUS: Action for Supplementary Runtime 6.2.0 (has been
successfully installed)
10:50:45 STATUS: Action for Supplementary Runtime 6.2.0 targeting x86 (has
been successfully installed)
10:50:45 STATUS: Action for Runtime Drivers 6.2.0 (has been successfully
installed)
10:50:45 STATUS: Action for Runtime Drivers 6.2.0 targeting x86 (has been
successfully installed)
10:50:45 STATUS: Saving installed QRM to
C:\QNXsdk\host\win32\x86\etc\system\package\installed\a680c89cd4b9341cfb316c
fb8b1f7ace.qrm (“Host Repository (Windows)” at
C:/QNXsdk/host/win32/x86/pkgs/repository/host/win32)
10:50:45 STATUS: Saving installed QRM to
C:\QNXsdk\host\win32\x86\etc\system\package\installed\e0c09735754f01da722547
23188b2626.qrm (“Target Repository (Neutrino)” at
C:/QNXsdk/host/win32/x86/pkgs/repository/target/qnx6)
10:50:45 STATUS: Actions completed
10:50:45 STATUS: Actions successfully completed.
10:51:17 STATUS: Created temporary directory
(C:\DOCUME~1\User\LOCALS~1\Temp\plib028134)
10:51:21 STATUS: Opening repository… (“PATCHA_PE.QPR” at
X:/Public/Neutrino Patch/PATCHA_PE.QPR)
10:51:21 STATUS: Created temporary directory
(C:\DOCUME~1\User\LOCALS~1\Temp\plib018440)
10:51:26 STATUS: Repository has been opened (79 packages)
10:51:27 STATUS: Saving remote QRM to
C:\QNXsdk\host\win32\x86\etc\system\package\sources.qrm (“PATCHA_PE.QPR” at
X:/Public/Neutrino Patch/PATCHA_PE.QPR)
10:51:30 STATUS: Dependency check started…
10:51:30 STATUS: Dependency check completed (fully satisfied)
10:51:34 STATUS: Actions being performed…
10:51:34 STATUS: Performing preliminary actions in this repository… (“QNX
IDE Patch A” at X:/Public/Neutrino Patch/IDE_620AIDE.QPR)
10:51:34 STATUS: Preliminary actions complete for this repository
10:51:34 STATUS: Performing preliminary actions in this repository…
(“SUPRUN.QPR” at X:/Public/Neutrino Patch/SUPRUN.QPR)
10:51:34 STATUS: Preliminary actions complete for this repository
10:51:34 STATUS: Performing preliminary actions in this repository…
(“PATCHA_PE.QPR” at X:/Public/Neutrino Patch/PATCHA_PE.QPR)
10:51:34 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib018440\audio-ddk-upd-6.2.0A-qnx.qpk]
(Audio DDK 6.2.0A)
10:51:34 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib018440\b-os-pe-winsdk-6.2.0A-x86-qnx.qpk
] (QNX Momentics PE 6.2.0A (Windows tool) targeting x86)
10:51:34 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib018440\b-os-se-winsdk-6.2.0A-x86-qnx.qpk
] (QNX Momentics SE 6.2.0A (Windows tool) targeting x86)
10:51:34 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib018440\os-update-2.1.3A-qnx.qpk] (QNX
Neutrino OS 2.1.3A)
10:51:34 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib018440\os-update-2.1.3A-x86-qnx.qpk]
(QNX Neutrino OS 2.1.3A targeting x86)
10:51:34 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib018440\os-update-drivers-2.1.3A-qnx.qpk]
(QNX Neutrino OS Device Drivers 2.1.3A)
10:51:34 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib018440\os-update-drivers-2.1.3A-x86-qnx.
qpk] (QNX Neutrino OS Device Drivers 2.1.3A targeting x86)
10:51:34 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib018440\ph-update-2.0.3A-qnx.qpk] (QNX
Photon 2.0.3A)
10:51:34 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib018440\ph-update-2.0.3A-x86-qnx.qpk]
(QNX Photon 2.0.3A targeting x86)
10:51:35 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib018440\ph-update-dev_x86-2.0.3A-qnx.qpk]
(QNX Photon Development 2.0.3A targeting x86)
10:51:35 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib018440\winsdk-update-1.1.1A-qnx.qpk]
(WinSDK 1.1.1A (win32 tool))
10:51:35 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib018440\winsdk-update-1.1.1A-x86-qnx.qpk]
(WinSDK 1.1.1A (Windows tool))
10:51:35 STATUS: Preliminary actions complete for this repository
10:51:35 STATUS: Generating required QPF files
10:51:35 STATUS: Saving installed QRM to
C:\QNXsdk\host\win32\x86\etc\system\package\installed\a680c89cd4b9341cfb316c
fb8b1f7ace.qrm (“Host Repository (Windows)” at
C:/QNXsdk/host/win32/x86/pkgs/repository/host/win32)
10:51:35 STATUS: Saving installed QRM to
C:\QNXsdk\host\win32\x86\etc\system\package\installed\e0c09735754f01da722547
23188b2626.qrm (“Target Repository (Neutrino)” at
C:/QNXsdk/host/win32/x86/pkgs/repository/target/qnx6)
10:51:35 STATUS: Saved proposed QPF file
(C:/QNXsdk/host/win32/x86/etc/system/package/packages.proposed)
10:51:35 STATUS: Opening QPF
(C:/QNXsdk/host/win32/x86/etc/system/package/packages)
10:51:35 STATUS: Parsing QPF file(s)
10:51:35 STATUS: Parsing QPM file(s)
10:51:36 STATUS: Opening QPF
(C:/QNXsdk/host/win32/x86/etc/system/package/packages.proposed)
10:51:36 STATUS: Parsing QPF file(s)
10:51:36 STATUS: Parsing QPM file(s)
10:51:36 STATUS: Comparing QPF files
(C:/QNXsdk/host/win32/x86/etc/system/package/packages vs.
C:/QNXsdk/host/win32/x86/etc/system/package/packages.proposed)
10:51:36 STATUS: Comparing individual files
10:51:39 STATUS: Spilled file detected for
C:/QNXsdk/target/qnx6/x86/usr/sbin/fs-cifs (at
C:/QNXsdk/target/qnx6/x86/usr/sbin/fs-cifs)
10:51:39 STATUS: Spilled file detected for
C:/QNXsdk/target/qnx6/x86/sbin/fs-pkg (at
C:/QNXsdk/target/qnx6/x86/sbin/fs-pkg)
10:52:20 STATUS: Locating required packages
10:52:20 STATUS: Package summary complete (0, 6)
10:52:21 STATUS: Created temporary directory
(C:\DOCUME~1\User\LOCALS~1\Temp\plib013024)
10:52:21 STATUS: Committing files to disk
10:52:23 STATUS: Applying unions and symlinks
10:52:23 STATUS: Saved proposed QPF as current
(C:/QNXsdk/host/win32/x86/etc/system/package/packages)
10:52:23 STATUS: Post commit for kept original files
10:52:23 STATUS: Action for Audio DDK 6.2.0A (has been successfully
installed)
10:52:23 STATUS: Action for QNX Momentics PE 6.2.0A (Windows tool)
targeting x86 (has been successfully installed)
10:52:23 STATUS: Action for QNX Momentics SE 6.2.0A (Windows tool)
targeting x86 (has been successfully installed)
10:52:23 STATUS: Action for QNX Neutrino OS 2.1.3A (has been successfully
installed)
10:52:23 STATUS: Action for QNX Neutrino OS 2.1.3A targeting x86 (has been
successfully installed)
10:52:23 STATUS: Action for QNX Neutrino OS Device Drivers 2.1.3A (has been
successfully installed)
10:52:23 STATUS: Action for QNX Neutrino OS Device Drivers 2.1.3A targeting
x86 (has been successfully installed)
10:52:23 STATUS: Action for QNX Photon 2.0.3A (has been successfully
installed)
10:52:23 STATUS: Action for QNX Photon 2.0.3A targeting x86 (has been
successfully installed)
10:52:23 STATUS: Action for QNX Photon Development 2.0.3A targeting x86
(has been successfully installed)
10:52:23 STATUS: Action for WinSDK 1.1.1A (win32 tool) (has been
successfully installed)
10:52:23 STATUS: Action for WinSDK 1.1.1A (Windows tool) (has been
successfully installed)
10:52:23 STATUS: Saving installed QRM to
C:\QNXsdk\host\win32\x86\etc\system\package\installed\e0c09735754f01da722547
23188b2626.qrm (“Target Repository (Neutrino)” at
C:/QNXsdk/host/win32/x86/pkgs/repository/target/qnx6)
10:52:23 STATUS: Saving installed QRM to
C:\QNXsdk\host\win32\x86\etc\system\package\installed\a680c89cd4b9341cfb316c
fb8b1f7ace.qrm (“Host Repository (Windows)” at
C:/QNXsdk/host/win32/x86/pkgs/repository/host/win32)
10:52:23 STATUS: Actions completed
10:52:23 STATUS: Actions successfully completed.
10:53:18 STATUS: Removed temporary directory
(C:/DOCUME~1/User/LOCALS~1/Temp/plib006334)
10:53:18 STATUS: Removed temporary directory
(C:/DOCUME~1/User/LOCALS~1/Temp/plib026500)
10:53:18 STATUS: Removed temporary directory
(C:/DOCUME~1/User/LOCALS~1/Temp/plib000732)
10:53:18 STATUS: Removed temporary directory
(C:/DOCUME~1/User/LOCALS~1/Temp/plib000851)
10:53:19 STATUS: Removed temporary directory
(C:/DOCUME~1/User/LOCALS~1/Temp/plib014386)
10:53:19 STATUS: Removed temporary directory
(C:/DOCUME~1/User/LOCALS~1/Temp/plib017786)
10:53:19 STATUS: Removed temporary directory
(C:/DOCUME~1/User/LOCALS~1/Temp/plib028134)
10:53:19 STATUS: Removed temporary directory
(C:/DOCUME~1/User/LOCALS~1/Temp/plib018440)
10:53:19 STATUS: Removed temporary directory
(C:/DOCUME~1/User/LOCALS~1/Temp/plib013024)
10:53:19 STATUS: Removed temporary directory
(C:/DOCUME~1/User/LOCALS~1/Temp/plib000041)
10:53:19 STATUS: Session closed
10:53:19 STATUS: Log file closed on 2003-05-29
“Jerry Chappell” <jchappell@qnx.com> wrote in message
news:bb7js4$gkp$1@nntp.qnx.com…
You can post the $QNX_HOST/etc/system/package/session.log* file (the
biggest
one is likely the one that was made during your installation) here and we
will look it over for any errors that occurred during installation.Jerry Chappell
“Johannes” <> Jsukamtoh@infolink.co.id> > wrote in message
news:bb6bsf$2jj$> 1@inn.qnx.com> …
Chris, may I know what to check (like list of files, environment
variables,
registry, etc.) to verify that the installation process is OK? The QNX
Installer shows successful message when the installation was completed,
but
something may have been missing. Where to look for the installation log
file? Thanks.
I checked both those logs and everything looks as-expected; I don’t think
there’s a problem from the installer’s point-of-view. I’ll check around to
see if anyone else has some ideas for you…
Jerry Chappell
“Johannes” <Jsukamtoh@infolink.co.id> wrote in message
news:bb8r3r$rvq$2@inn.qnx.com…
Here is the content of my latest session.log. I have tried to re-install:
10:39:46 STATUS: Log file started on 2003-05-29
10:39:46 STATUS: Session started by the qnxinstall 1.0 (win32) using
libpackage 2.2
10:39:46 STATUS: Created temporary directory
(C:\DOCUME~1\User\LOCALS~1\Temp\plib000041)
10:39:46 STATUS: Existing environment variable
(QNX_HOST=C:\QNXsdk\host\win32\x86)
10:39:46 STATUS: Existing environment variable
(QNX_TARGET=C:\QNXsdk\target\qnx6)
10:39:46 STATUS: Existing environment variable(PATH=%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;C:\QNXsd
k\host\win32\x86\usr\bin;C:\QNXsdk\host\win32\x86\usr\bin\cygwin_dll)
10:39:46 STATUS: Topics file not installed and will not be used
(C:\QNXsdk\host\win32\x86\target\qnx6\usr\share\package\topics.xml)
10:39:46 STATUS: Loaded installed QPF file
(C:/QNXsdk/host/win32/x86/etc/system/package/packages)
10:39:46 STATUS: Loading installed QRM
(C:/QNXsdk/host/win32/x86/pkgs/repository/host/win32)
10:39:46 STATUS: Opening installed repository… (“Host Repository
(Windows)” at C:/QNXsdk/host/win32/x86/pkgs/repository/host/win32)
10:39:46 STATUS: Saving installed QRM toC:\QNXsdk\host\win32\x86\etc\system\package\installed\a680c89cd4b9341cfb316c
fb8b1f7ace.qrm (“Host Repository (Windows)” at
C:/QNXsdk/host/win32/x86/pkgs/repository/host/win32)
10:39:46 STATUS: Installed repository has been parsed (24 packages)
10:39:46 STATUS: Loading installed QRM
(C:/QNXsdk/host/win32/x86/pkgs/repository/target/qnx6)
10:39:46 STATUS: Opening installed repository… (“Target Repository
(Neutrino)” at C:/QNXsdk/host/win32/x86/pkgs/repository/target/qnx6)
10:39:47 STATUS: Saving installed QRM toC:\QNXsdk\host\win32\x86\etc\system\package\installed\e0c09735754f01da722547
23188b2626.qrm (“Target Repository (Neutrino)” at
C:/QNXsdk/host/win32/x86/pkgs/repository/target/qnx6)
10:39:47 STATUS: Installed repository has been parsed (94 packages)
10:39:47 STATUS: Opening installed repository… (“Host Repository
(Neutrino)” at C:/QNXsdk/host/win32/x86/pkgs/repository/host/qnx6)
10:39:47 STATUS: Installed repository has been parsed (0 packages)
10:39:47 STATUS: Opening installed repository… (“Host Repository
(Solaris)” at C:/QNXsdk/host/win32/x86/pkgs/repository/host/solaris)
10:39:47 STATUS: Installed repository has been parsed (0 packages)
10:39:47 STATUS: Loaded installed QPF file
(C:/QNXsdk/host/win32/x86/etc/system/package/packages)
10:40:31 STATUS: Created temporary directory
(C:\DOCUME~1\User\LOCALS~1\Temp\plib006334)
10:40:46 STATUS: Loading remote QRM (“IDE_620AIDE.QPR” at
X:/Public/Neutrino Patch/IDE_620AIDE.QPR)
10:40:47 STATUS: Opening repository… (“QNX IDE Patch A” at
X:/Public/Neutrino Patch/IDE_620AIDE.QPR)
10:40:47 STATUS: Created temporary directory
(C:\DOCUME~1\User\LOCALS~1\Temp\plib026500)
10:41:16 STATUS: Repository has been opened (91 packages)
10:41:16 STATUS: Saving remote QRM to
C:\QNXsdk\host\win32\x86\etc\system\package\sources.qrm (“QNX IDE Patch
A”
at X:/Public/Neutrino Patch/IDE_620AIDE.QPR)
10:41:26 STATUS: Dependency check started…
10:41:26 STATUS: Dependency check completed (fully satisfied)
10:41:34 STATUS: Dependency check started…
10:41:34 STATUS: Dependency check completed (fully satisfied)
10:41:34 STATUS: Actions being performed…
10:41:34 STATUS: Performing preliminary actions in this repository…
(“QNX
IDE Patch A” at X:/Public/Neutrino Patch/IDE_620AIDE.QPR)
10:41:34 STATUS: Install package MANIFEST[C:/DOCUME~1/User/LOCALS~1/Temp/plib026500\b-winsdk-620aide-6.2.0A-x86-qnx.q
pk] (QNX IDE Patch A 6.2.0A (Windows tool) targeting x86)
10:41:34 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib026500\ide_w-62Aide-6.2.0A-qnx.qpk]
(Eclipse 6.2.0A (win32 tool))
10:41:35 STATUS: Install package MANIFEST[C:/DOCUME~1/User/LOCALS~1/Temp/plib026500\ide_w-62Aide-6.2.0A-x86-qnx.qpk]
(Eclipse 6.2.0A (Windows tool))
10:41:35 STATUS: Install package MANIFEST[C:/DOCUME~1/User/LOCALS~1/Temp/plib026500\ide_w-62Aide-dev-6.2.0A-qnx.qpk]
(Eclipse Development 6.2.0A (win32 tool))
10:41:35 STATUS: Install package MANIFEST[C:/DOCUME~1/User/LOCALS~1/Temp/plib026500\ide_w-62Aide-dev-6.2.0A-x86-qnx.q
pk] (Eclipse Development 6.2.0A (Windows tool))
10:41:35 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib026500\malloc-62Aide-6.2.0A-qnx.qpk]
(malloc 6.2.0A)
10:41:35 STATUS: Install package MANIFEST[C:/DOCUME~1/User/LOCALS~1/Temp/plib026500\malloc-62Aide-6.2.0A-x86-qnx.qpk]
(malloc 6.2.0A targeting x86)
10:41:35 STATUS: Install package MANIFEST[C:/DOCUME~1/User/LOCALS~1/Temp/plib026500\malloc-62Aide-dev-6.2.0A-qnx.qpk]
(malloc Development 6.2.0A)
10:41:35 STATUS: Install package MANIFEST[C:/DOCUME~1/User/LOCALS~1/Temp/plib026500\malloc-62Aide-dev_x86-6.2.0A-qnx.
qpk] (malloc Development 6.2.0A targeting x86)
10:41:35 STATUS: Install package MANIFEST[C:/DOCUME~1/User/LOCALS~1/Temp/plib026500\malloc-62Aide-slib-6.2.0A-qnx.qpk
] (malloc shared libraries 6.2.0A)
10:41:35 STATUS: Install package MANIFEST[C:/DOCUME~1/User/LOCALS~1/Temp/plib026500\malloc-62Aide-slib-6.2.0A-x86-qnx
.qpk] (malloc shared libraries 6.2.0A targeting x86)
10:41:35 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib026500\qconn-62Aide-6.2.0A-qnx.qpk]
(qconn 6.2.0A)
10:41:36 STATUS: Install package MANIFEST[C:/DOCUME~1/User/LOCALS~1/Temp/plib026500\qconn-62Aide-6.2.0A-x86-qnx.qpk]
(qconn 6.2.0A targeting x86)
10:41:36 STATUS: Install package MANIFEST[C:/DOCUME~1/User/LOCALS~1/Temp/plib026500\winsdk-62Aide-dev_x86-6.2.0A-qnx.
qpk] (WinSDK Development 6.2.0A (win32 tool) targeting x86)
10:41:36 STATUS: Install package MANIFEST[C:/DOCUME~1/User/LOCALS~1/Temp/plib026500\winsdk-62Aide-dev_x86-6.2.0A-x86-
qnx.qpk] (WinSDK Development 6.2.0A (Windows tool) targeting x86)
10:41:36 STATUS: Preliminary actions complete for this repository
10:41:36 STATUS: Generating required QPF files
10:41:36 STATUS: Saving installed QRM toC:\QNXsdk\host\win32\x86\etc\system\package\installed\a680c89cd4b9341cfb316c
fb8b1f7ace.qrm (“Host Repository (Windows)” at
C:/QNXsdk/host/win32/x86/pkgs/repository/host/win32)
10:41:36 STATUS: Saving installed QRM toC:\QNXsdk\host\win32\x86\etc\system\package\installed\e0c09735754f01da722547
23188b2626.qrm (“Target Repository (Neutrino)” at
C:/QNXsdk/host/win32/x86/pkgs/repository/target/qnx6)
10:41:36 STATUS: Saved proposed QPF file
(C:/QNXsdk/host/win32/x86/etc/system/package/packages.proposed)
10:41:36 STATUS: Opening QPF
(C:/QNXsdk/host/win32/x86/etc/system/package/packages)
10:41:36 STATUS: Parsing QPF file(s)
10:41:36 STATUS: Parsing QPM file(s)
10:41:38 STATUS: Opening QPF
(C:/QNXsdk/host/win32/x86/etc/system/package/packages.proposed)
10:41:38 STATUS: Parsing QPF file(s)
10:41:38 STATUS: Parsing QPM file(s)
10:41:38 STATUS: Comparing QPF files
(C:/QNXsdk/host/win32/x86/etc/system/package/packages vs.
C:/QNXsdk/host/win32/x86/etc/system/package/packages.proposed)
10:41:38 STATUS: Comparing individual files
10:41:38 STATUS: Spilled file detected for
C:/QNXsdk/host/win32/x86/usr/Eclipse/install/install.properties (at
C:/QNXsdk/host/win32/x86/usr/Eclipse/install/install.properties)
10:41:46 STATUS: Spilled file detected forC:/QNXsdk/host/win32/x86/usr/Eclipse/plugins/com.qnx.tools.ide.doc.user/src/
com/qnx/tools/ide/doc/user (atC:/QNXsdk/host/win32/x86/usr/Eclipse/plugins/com.qnx.tools.ide.doc.user/src/
com/qnx/tools/ide/doc/user)
10:41:56 STATUS: Spilled file detected for
C:/QNXsdk/target/qnx6/x86/usr/lib/libmalloc_g.so (at
C:/QNXsdk/target/qnx6/x86/usr/lib/libmalloc_g.so)
10:42:52 STATUS: Locating required packages
10:42:52 STATUS: Package summary complete (0, 7)
10:42:52 STATUS: Created temporary directory
(C:\DOCUME~1\User\LOCALS~1\Temp\plib000732)
10:42:57 STATUS: Committing files to disk
10:43:14 WARNING: Not found in QPK(C:/QNXsdk/host/win32/x86/usr/Eclipse/plugins/com.qnx.tools.ide.doc.user/src
/com/qnx/tools/ide/doc/user)
10:43:14 STATUS: Applying unions and symlinks
10:43:14 STATUS: Saved proposed QPF as current
(C:/QNXsdk/host/win32/x86/etc/system/package/packages)
10:43:14 STATUS: Post commit for kept original files
10:43:14 STATUS: Action for QNX IDE Patch A 6.2.0A (Windows tool)
targeting
x86 (has been successfully installed)
10:43:14 STATUS: Action for Eclipse 6.2.0A (win32 tool) (has been
successfully installed)
10:43:14 STATUS: Action for Eclipse 6.2.0A (Windows tool) (has been
successfully installed)
10:43:14 STATUS: Action for Eclipse Development 6.2.0A (win32 tool) (has
been successfully installed)
10:43:14 STATUS: Action for Eclipse Development 6.2.0A (Windows tool)
(has
been successfully installed)
10:43:14 STATUS: Action for malloc 6.2.0A (has been successfully
installed)
10:43:14 STATUS: Action for malloc 6.2.0A targeting x86 (has been
successfully installed)
10:43:14 STATUS: Action for malloc Development 6.2.0A (has been
successfully installed)
10:43:14 STATUS: Action for malloc Development 6.2.0A targeting x86 (has
been successfully installed)
10:43:14 STATUS: Action for malloc shared libraries 6.2.0A (has been
successfully installed)
10:43:14 STATUS: Action for malloc shared libraries 6.2.0A targeting x86
(has been successfully installed)
10:43:14 STATUS: Action for qconn 6.2.0A (has been successfully
installed)
10:43:14 STATUS: Action for qconn 6.2.0A targeting x86 (has been
successfully installed)
10:43:14 STATUS: Action for WinSDK Development 6.2.0A (win32 tool)
targeting x86 (has been successfully installed)
10:43:14 STATUS: Action for WinSDK Development 6.2.0A (Windows tool)
targeting x86 (has been successfully installed)
10:43:14 STATUS: Saving installed QRM toC:\QNXsdk\host\win32\x86\etc\system\package\installed\a680c89cd4b9341cfb316c
fb8b1f7ace.qrm (“Host Repository (Windows)” at
C:/QNXsdk/host/win32/x86/pkgs/repository/host/win32)
10:43:14 STATUS: Saving installed QRM toC:\QNXsdk\host\win32\x86\etc\system\package\installed\e0c09735754f01da722547
23188b2626.qrm (“Target Repository (Neutrino)” at
C:/QNXsdk/host/win32/x86/pkgs/repository/target/qnx6)
10:43:14 STATUS: Actions completed
10:43:14 STATUS: Actions successfully completed.
10:50:12 STATUS: Created temporary directory
(C:\DOCUME~1\User\LOCALS~1\Temp\plib000851)
10:50:12 STATUS: Opening repository… (“SUPRUN.QPR” at
X:/Public/Neutrino
Patch/SUPRUN.QPR)
10:50:13 STATUS: Created temporary directory
(C:\DOCUME~1\User\LOCALS~1\Temp\plib014386)
10:50:14 STATUS: Repository has been opened (45 packages)
10:50:14 STATUS: Saving remote QRM to
C:\QNXsdk\host\win32\x86\etc\system\package\sources.qrm (“SUPRUN.QPR” at
X:/Public/Neutrino Patch/SUPRUN.QPR)
10:50:33 STATUS: Dependency check started…
10:50:33 STATUS: Dependency check completed (fully satisfied)
10:50:37 STATUS: Actions being performed…
10:50:37 STATUS: Performing preliminary actions in this repository…
(“QNX
IDE Patch A” at X:/Public/Neutrino Patch/IDE_620AIDE.QPR)
10:50:37 STATUS: Preliminary actions complete for this repository
10:50:37 STATUS: Performing preliminary actions in this repository…
(“SUPRUN.QPR” at X:/Public/Neutrino Patch/SUPRUN.QPR)
10:50:37 STATUS: Install package MANIFEST[C:/DOCUME~1/User/LOCALS~1/Temp/plib014386\b-suprun-winsdk-6.2.0-x86-qnx.qpk
] (Supplementary Run-time Package 6.2.0 (win32 tool) targeting x86)
10:50:37 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib014386\hat-1.1.0-qnx.qpk] (High
Availability Toolkit 1.1.0)
10:50:37 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib014386\hat-1.1.0-x86-qnx.qpk] (High
Availability Toolkit 1.1.0 targeting x86)
10:50:37 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib014386\hat_x86-1.1.0-qnx.qpk] (High
Availability Toolkit 1.1.0 targeting x86)
10:50:37 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib014386\suprun-6.2.0-qnx.qpk]
(Supplementary Runtime 6.2.0)
10:50:37 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib014386\suprun-6.2.0-x86-qnx.qpk]
(Supplementary Runtime 6.2.0 targeting x86)
10:50:37 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib014386\suprun-drivers-6.2.0-qnx.qpk]
(Runtime Drivers 6.2.0)
10:50:37 STATUS: Install package MANIFEST[C:/DOCUME~1/User/LOCALS~1/Temp/plib014386\suprun-drivers-6.2.0-x86-qnx.qpk]
(Runtime Drivers 6.2.0 targeting x86)
10:50:37 STATUS: Preliminary actions complete for this repository
10:50:37 STATUS: Generating required QPF files
10:50:37 STATUS: Saving installed QRM toC:\QNXsdk\host\win32\x86\etc\system\package\installed\a680c89cd4b9341cfb316c
fb8b1f7ace.qrm (“Host Repository (Windows)” at
C:/QNXsdk/host/win32/x86/pkgs/repository/host/win32)
10:50:37 STATUS: Saving installed QRM toC:\QNXsdk\host\win32\x86\etc\system\package\installed\e0c09735754f01da722547
23188b2626.qrm (“Target Repository (Neutrino)” at
C:/QNXsdk/host/win32/x86/pkgs/repository/target/qnx6)
10:50:37 STATUS: Saved proposed QPF file
(C:/QNXsdk/host/win32/x86/etc/system/package/packages.proposed)
10:50:37 STATUS: Opening QPF
(C:/QNXsdk/host/win32/x86/etc/system/package/packages)
10:50:37 STATUS: Parsing QPF file(s)
10:50:37 STATUS: Parsing QPM file(s)
10:50:38 STATUS: Opening QPF
(C:/QNXsdk/host/win32/x86/etc/system/package/packages.proposed)
10:50:38 STATUS: Parsing QPF file(s)
10:50:38 STATUS: Parsing QPM file(s)
10:50:38 STATUS: Comparing QPF files
(C:/QNXsdk/host/win32/x86/etc/system/package/packages vs.
C:/QNXsdk/host/win32/x86/etc/system/package/packages.proposed)
10:50:38 STATUS: Comparing individual files
10:50:43 STATUS: Locating required packages
10:50:43 STATUS: Package summary complete (0, 6)
10:50:44 STATUS: Created temporary directory
(C:\DOCUME~1\User\LOCALS~1\Temp\plib017786)
10:50:44 STATUS: Committing files to disk
10:50:45 STATUS: Applying unions and symlinks
10:50:45 STATUS: Saved proposed QPF as current
(C:/QNXsdk/host/win32/x86/etc/system/package/packages)
10:50:45 STATUS: Post commit for kept original files
10:50:45 STATUS: Action for Supplementary Run-time Package 6.2.0 (win32
tool) targeting x86 (has been successfully installed)
10:50:45 STATUS: Action for High Availability Toolkit 1.1.0 (has been
successfully installed)
10:50:45 STATUS: Action for High Availability Toolkit 1.1.0 targeting x86
(has been successfully installed)
10:50:45 STATUS: Action for High Availability Toolkit 1.1.0 targeting x86
(has been successfully installed)
10:50:45 STATUS: Action for Supplementary Runtime 6.2.0 (has been
successfully installed)
10:50:45 STATUS: Action for Supplementary Runtime 6.2.0 targeting x86
(has
been successfully installed)
10:50:45 STATUS: Action for Runtime Drivers 6.2.0 (has been successfully
installed)
10:50:45 STATUS: Action for Runtime Drivers 6.2.0 targeting x86 (has been
successfully installed)
10:50:45 STATUS: Saving installed QRM toC:\QNXsdk\host\win32\x86\etc\system\package\installed\a680c89cd4b9341cfb316c
fb8b1f7ace.qrm (“Host Repository (Windows)” at
C:/QNXsdk/host/win32/x86/pkgs/repository/host/win32)
10:50:45 STATUS: Saving installed QRM toC:\QNXsdk\host\win32\x86\etc\system\package\installed\e0c09735754f01da722547
23188b2626.qrm (“Target Repository (Neutrino)” at
C:/QNXsdk/host/win32/x86/pkgs/repository/target/qnx6)
10:50:45 STATUS: Actions completed
10:50:45 STATUS: Actions successfully completed.
10:51:17 STATUS: Created temporary directory
(C:\DOCUME~1\User\LOCALS~1\Temp\plib028134)
10:51:21 STATUS: Opening repository… (“PATCHA_PE.QPR” at
X:/Public/Neutrino Patch/PATCHA_PE.QPR)
10:51:21 STATUS: Created temporary directory
(C:\DOCUME~1\User\LOCALS~1\Temp\plib018440)
10:51:26 STATUS: Repository has been opened (79 packages)
10:51:27 STATUS: Saving remote QRM to
C:\QNXsdk\host\win32\x86\etc\system\package\sources.qrm (“PATCHA_PE.QPR”
at
X:/Public/Neutrino Patch/PATCHA_PE.QPR)
10:51:30 STATUS: Dependency check started…
10:51:30 STATUS: Dependency check completed (fully satisfied)
10:51:34 STATUS: Actions being performed…
10:51:34 STATUS: Performing preliminary actions in this repository…
(“QNX
IDE Patch A” at X:/Public/Neutrino Patch/IDE_620AIDE.QPR)
10:51:34 STATUS: Preliminary actions complete for this repository
10:51:34 STATUS: Performing preliminary actions in this repository…
(“SUPRUN.QPR” at X:/Public/Neutrino Patch/SUPRUN.QPR)
10:51:34 STATUS: Preliminary actions complete for this repository
10:51:34 STATUS: Performing preliminary actions in this repository…
(“PATCHA_PE.QPR” at X:/Public/Neutrino Patch/PATCHA_PE.QPR)
10:51:34 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib018440\audio-ddk-upd-6.2.0A-qnx.qpk]
(Audio DDK 6.2.0A)
10:51:34 STATUS: Install package MANIFEST[C:/DOCUME~1/User/LOCALS~1/Temp/plib018440\b-os-pe-winsdk-6.2.0A-x86-qnx.qpk
] (QNX Momentics PE 6.2.0A (Windows tool) targeting x86)
10:51:34 STATUS: Install package MANIFEST[C:/DOCUME~1/User/LOCALS~1/Temp/plib018440\b-os-se-winsdk-6.2.0A-x86-qnx.qpk
] (QNX Momentics SE 6.2.0A (Windows tool) targeting x86)
10:51:34 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib018440\os-update-2.1.3A-qnx.qpk] (QNX
Neutrino OS 2.1.3A)
10:51:34 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib018440\os-update-2.1.3A-x86-qnx.qpk]
(QNX Neutrino OS 2.1.3A targeting x86)
10:51:34 STATUS: Install package MANIFEST[C:/DOCUME~1/User/LOCALS~1/Temp/plib018440\os-update-drivers-2.1.3A-qnx.qpk]
(QNX Neutrino OS Device Drivers 2.1.3A)
10:51:34 STATUS: Install package MANIFEST[C:/DOCUME~1/User/LOCALS~1/Temp/plib018440\os-update-drivers-2.1.3A-x86-qnx.
qpk] (QNX Neutrino OS Device Drivers 2.1.3A targeting x86)
10:51:34 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib018440\ph-update-2.0.3A-qnx.qpk] (QNX
Photon 2.0.3A)
10:51:34 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib018440\ph-update-2.0.3A-x86-qnx.qpk]
(QNX Photon 2.0.3A targeting x86)
10:51:35 STATUS: Install package MANIFEST[C:/DOCUME~1/User/LOCALS~1/Temp/plib018440\ph-update-dev_x86-2.0.3A-qnx.qpk]
(QNX Photon Development 2.0.3A targeting x86)
10:51:35 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib018440\winsdk-update-1.1.1A-qnx.qpk]
(WinSDK 1.1.1A (win32 tool))
10:51:35 STATUS: Install package MANIFEST[C:/DOCUME~1/User/LOCALS~1/Temp/plib018440\winsdk-update-1.1.1A-x86-qnx.qpk]
(WinSDK 1.1.1A (Windows tool))
10:51:35 STATUS: Preliminary actions complete for this repository
10:51:35 STATUS: Generating required QPF files
10:51:35 STATUS: Saving installed QRM toC:\QNXsdk\host\win32\x86\etc\system\package\installed\a680c89cd4b9341cfb316c
fb8b1f7ace.qrm (“Host Repository (Windows)” at
C:/QNXsdk/host/win32/x86/pkgs/repository/host/win32)
10:51:35 STATUS: Saving installed QRM toC:\QNXsdk\host\win32\x86\etc\system\package\installed\e0c09735754f01da722547
23188b2626.qrm (“Target Repository (Neutrino)” at
C:/QNXsdk/host/win32/x86/pkgs/repository/target/qnx6)
10:51:35 STATUS: Saved proposed QPF file
(C:/QNXsdk/host/win32/x86/etc/system/package/packages.proposed)
10:51:35 STATUS: Opening QPF
(C:/QNXsdk/host/win32/x86/etc/system/package/packages)
10:51:35 STATUS: Parsing QPF file(s)
10:51:35 STATUS: Parsing QPM file(s)
10:51:36 STATUS: Opening QPF
(C:/QNXsdk/host/win32/x86/etc/system/package/packages.proposed)
10:51:36 STATUS: Parsing QPF file(s)
10:51:36 STATUS: Parsing QPM file(s)
10:51:36 STATUS: Comparing QPF files
(C:/QNXsdk/host/win32/x86/etc/system/package/packages vs.
C:/QNXsdk/host/win32/x86/etc/system/package/packages.proposed)
10:51:36 STATUS: Comparing individual files
10:51:39 STATUS: Spilled file detected for
C:/QNXsdk/target/qnx6/x86/usr/sbin/fs-cifs (at
C:/QNXsdk/target/qnx6/x86/usr/sbin/fs-cifs)
10:51:39 STATUS: Spilled file detected for
C:/QNXsdk/target/qnx6/x86/sbin/fs-pkg (at
C:/QNXsdk/target/qnx6/x86/sbin/fs-pkg)
10:52:20 STATUS: Locating required packages
10:52:20 STATUS: Package summary complete (0, 6)
10:52:21 STATUS: Created temporary directory
(C:\DOCUME~1\User\LOCALS~1\Temp\plib013024)
10:52:21 STATUS: Committing files to disk
10:52:23 STATUS: Applying unions and symlinks
10:52:23 STATUS: Saved proposed QPF as current
(C:/QNXsdk/host/win32/x86/etc/system/package/packages)
10:52:23 STATUS: Post commit for kept original files
10:52:23 STATUS: Action for Audio DDK 6.2.0A (has been successfully
installed)
10:52:23 STATUS: Action for QNX Momentics PE 6.2.0A (Windows tool)
targeting x86 (has been successfully installed)
10:52:23 STATUS: Action for QNX Momentics SE 6.2.0A (Windows tool)
targeting x86 (has been successfully installed)
10:52:23 STATUS: Action for QNX Neutrino OS 2.1.3A (has been successfully
installed)
10:52:23 STATUS: Action for QNX Neutrino OS 2.1.3A targeting x86 (has
been
successfully installed)
10:52:23 STATUS: Action for QNX Neutrino OS Device Drivers 2.1.3A (has
been
successfully installed)
10:52:23 STATUS: Action for QNX Neutrino OS Device Drivers 2.1.3A
targeting
x86 (has been successfully installed)
10:52:23 STATUS: Action for QNX Photon 2.0.3A (has been successfully
installed)
10:52:23 STATUS: Action for QNX Photon 2.0.3A targeting x86 (has been
successfully installed)
10:52:23 STATUS: Action for QNX Photon Development 2.0.3A targeting x86
(has been successfully installed)
10:52:23 STATUS: Action for WinSDK 1.1.1A (win32 tool) (has been
successfully installed)
10:52:23 STATUS: Action for WinSDK 1.1.1A (Windows tool) (has been
successfully installed)
10:52:23 STATUS: Saving installed QRM toC:\QNXsdk\host\win32\x86\etc\system\package\installed\e0c09735754f01da722547
23188b2626.qrm (“Target Repository (Neutrino)” at
C:/QNXsdk/host/win32/x86/pkgs/repository/target/qnx6)
10:52:23 STATUS: Saving installed QRM toC:\QNXsdk\host\win32\x86\etc\system\package\installed\a680c89cd4b9341cfb316c
fb8b1f7ace.qrm (“Host Repository (Windows)” at
C:/QNXsdk/host/win32/x86/pkgs/repository/host/win32)
10:52:23 STATUS: Actions completed
10:52:23 STATUS: Actions successfully completed.
10:53:18 STATUS: Removed temporary directory
(C:/DOCUME~1/User/LOCALS~1/Temp/plib006334)
10:53:18 STATUS: Removed temporary directory
(C:/DOCUME~1/User/LOCALS~1/Temp/plib026500)
10:53:18 STATUS: Removed temporary directory
(C:/DOCUME~1/User/LOCALS~1/Temp/plib000732)
10:53:18 STATUS: Removed temporary directory
(C:/DOCUME~1/User/LOCALS~1/Temp/plib000851)
10:53:19 STATUS: Removed temporary directory
(C:/DOCUME~1/User/LOCALS~1/Temp/plib014386)
10:53:19 STATUS: Removed temporary directory
(C:/DOCUME~1/User/LOCALS~1/Temp/plib017786)
10:53:19 STATUS: Removed temporary directory
(C:/DOCUME~1/User/LOCALS~1/Temp/plib028134)
10:53:19 STATUS: Removed temporary directory
(C:/DOCUME~1/User/LOCALS~1/Temp/plib018440)
10:53:19 STATUS: Removed temporary directory
(C:/DOCUME~1/User/LOCALS~1/Temp/plib013024)
10:53:19 STATUS: Removed temporary directory
(C:/DOCUME~1/User/LOCALS~1/Temp/plib000041)
10:53:19 STATUS: Session closed
10:53:19 STATUS: Log file closed on 2003-05-29“Jerry Chappell” <> jchappell@qnx.com> > wrote in message
news:bb7js4$gkp$> 1@nntp.qnx.com> …
You can post the $QNX_HOST/etc/system/package/session.log* file (the
biggest
one is likely the one that was made during your installation) here and
we
will look it over for any errors that occurred during installation.Jerry Chappell
“Johannes” <> Jsukamtoh@infolink.co.id> > wrote in message
news:bb6bsf$2jj$> 1@inn.qnx.com> …
Chris, may I know what to check (like list of files, environment
variables,
registry, etc.) to verify that the installation process is OK? The QNX
Installer shows successful message when the installation was
completed,
but
something may have been missing. Where to look for the installation
log
file? Thanks.
\
Thanks Jerry. During the weekend, I have tried to re-install the entire
things including to change my computer name and to register for a new
license key. But I still got the same problem. I just wander where the
problem is. We are running two programs in the same computer here, ie. the
flexlm and IDE. Is the error due to IDE can’t locate flexlm, or flexlm just
rejects the license validation request?
I wish to hear from you soon because we are 12 hours different, and I don’t
mind to stay late just to get someone to help me out with this problem. And
I already lost 1 week to figure out this problem. I really appreciate for
your effort.
“Jerry Chappell” <jchappell@qnx.com> wrote in message
news:bbfgj0$pce$1@nntp.qnx.com…
I checked both those logs and everything looks as-expected; I don’t think
there’s a problem from the installer’s point-of-view. I’ll check around to
see if anyone else has some ideas for you…Jerry Chappell
“Johannes” <> Jsukamtoh@infolink.co.id> > wrote in message
news:bb8r3r$rvq$> 2@inn.qnx.com> …
Here is the content of my latest session.log. I have tried to
re-install:10:39:46 STATUS: Log file started on 2003-05-29
10:39:46 STATUS: Session started by the qnxinstall 1.0 (win32) using
libpackage 2.2
10:39:46 STATUS: Created temporary directory
(C:\DOCUME~1\User\LOCALS~1\Temp\plib000041)
10:39:46 STATUS: Existing environment variable
(QNX_HOST=C:\QNXsdk\host\win32\x86)
10:39:46 STATUS: Existing environment variable
(QNX_TARGET=C:\QNXsdk\target\qnx6)
10:39:46 STATUS: Existing environment variable
(PATH=%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;C:\QNXsd
k\host\win32\x86\usr\bin;C:\QNXsdk\host\win32\x86\usr\bin\cygwin_dll)
10:39:46 STATUS: Topics file not installed and will not be used
(C:\QNXsdk\host\win32\x86\target\qnx6\usr\share\package\topics.xml)
10:39:46 STATUS: Loaded installed QPF file
(C:/QNXsdk/host/win32/x86/etc/system/package/packages)
10:39:46 STATUS: Loading installed QRM
(C:/QNXsdk/host/win32/x86/pkgs/repository/host/win32)
10:39:46 STATUS: Opening installed repository… (“Host Repository
(Windows)” at C:/QNXsdk/host/win32/x86/pkgs/repository/host/win32)
10:39:46 STATUS: Saving installed QRM to
C:\QNXsdk\host\win32\x86\etc\system\package\installed\a680c89cd4b9341cfb316c
fb8b1f7ace.qrm (“Host Repository (Windows)” at
C:/QNXsdk/host/win32/x86/pkgs/repository/host/win32)
10:39:46 STATUS: Installed repository has been parsed (24 packages)
10:39:46 STATUS: Loading installed QRM
(C:/QNXsdk/host/win32/x86/pkgs/repository/target/qnx6)
10:39:46 STATUS: Opening installed repository… (“Target Repository
(Neutrino)” at C:/QNXsdk/host/win32/x86/pkgs/repository/target/qnx6)
10:39:47 STATUS: Saving installed QRM to
C:\QNXsdk\host\win32\x86\etc\system\package\installed\e0c09735754f01da722547
23188b2626.qrm (“Target Repository (Neutrino)” at
C:/QNXsdk/host/win32/x86/pkgs/repository/target/qnx6)
10:39:47 STATUS: Installed repository has been parsed (94 packages)
10:39:47 STATUS: Opening installed repository… (“Host Repository
(Neutrino)” at C:/QNXsdk/host/win32/x86/pkgs/repository/host/qnx6)
10:39:47 STATUS: Installed repository has been parsed (0 packages)
10:39:47 STATUS: Opening installed repository… (“Host Repository
(Solaris)” at C:/QNXsdk/host/win32/x86/pkgs/repository/host/solaris)
10:39:47 STATUS: Installed repository has been parsed (0 packages)
10:39:47 STATUS: Loaded installed QPF file
(C:/QNXsdk/host/win32/x86/etc/system/package/packages)
10:40:31 STATUS: Created temporary directory
(C:\DOCUME~1\User\LOCALS~1\Temp\plib006334)
10:40:46 STATUS: Loading remote QRM (“IDE_620AIDE.QPR” at
X:/Public/Neutrino Patch/IDE_620AIDE.QPR)
10:40:47 STATUS: Opening repository… (“QNX IDE Patch A” at
X:/Public/Neutrino Patch/IDE_620AIDE.QPR)
10:40:47 STATUS: Created temporary directory
(C:\DOCUME~1\User\LOCALS~1\Temp\plib026500)
10:41:16 STATUS: Repository has been opened (91 packages)
10:41:16 STATUS: Saving remote QRM to
C:\QNXsdk\host\win32\x86\etc\system\package\sources.qrm (“QNX IDE Patch
A”
at X:/Public/Neutrino Patch/IDE_620AIDE.QPR)
10:41:26 STATUS: Dependency check started…
10:41:26 STATUS: Dependency check completed (fully satisfied)
10:41:34 STATUS: Dependency check started…
10:41:34 STATUS: Dependency check completed (fully satisfied)
10:41:34 STATUS: Actions being performed…
10:41:34 STATUS: Performing preliminary actions in this repository…
(“QNX
IDE Patch A” at X:/Public/Neutrino Patch/IDE_620AIDE.QPR)
10:41:34 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib026500\b-winsdk-620aide-6.2.0A-x86-qnx.q
pk] (QNX IDE Patch A 6.2.0A (Windows tool) targeting x86)
10:41:34 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib026500\ide_w-62Aide-6.2.0A-qnx.qpk]
(Eclipse 6.2.0A (win32 tool))
10:41:35 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib026500\ide_w-62Aide-6.2.0A-x86-qnx.qpk]
(Eclipse 6.2.0A (Windows tool))
10:41:35 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib026500\ide_w-62Aide-dev-6.2.0A-qnx.qpk]
(Eclipse Development 6.2.0A (win32 tool))
10:41:35 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib026500\ide_w-62Aide-dev-6.2.0A-x86-qnx.q
pk] (Eclipse Development 6.2.0A (Windows tool))
10:41:35 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib026500\malloc-62Aide-6.2.0A-qnx.qpk]
(malloc 6.2.0A)
10:41:35 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib026500\malloc-62Aide-6.2.0A-x86-qnx.qpk]
(malloc 6.2.0A targeting x86)
10:41:35 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib026500\malloc-62Aide-dev-6.2.0A-qnx.qpk]
(malloc Development 6.2.0A)
10:41:35 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib026500\malloc-62Aide-dev_x86-6.2.0A-qnx.
qpk] (malloc Development 6.2.0A targeting x86)
10:41:35 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib026500\malloc-62Aide-slib-6.2.0A-qnx.qpk
] (malloc shared libraries 6.2.0A)
10:41:35 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib026500\malloc-62Aide-slib-6.2.0A-x86-qnx
.qpk] (malloc shared libraries 6.2.0A targeting x86)
10:41:35 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib026500\qconn-62Aide-6.2.0A-qnx.qpk]
(qconn 6.2.0A)
10:41:36 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib026500\qconn-62Aide-6.2.0A-x86-qnx.qpk]
(qconn 6.2.0A targeting x86)
10:41:36 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib026500\winsdk-62Aide-dev_x86-6.2.0A-qnx.
qpk] (WinSDK Development 6.2.0A (win32 tool) targeting x86)
10:41:36 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib026500\winsdk-62Aide-dev_x86-6.2.0A-x86-
qnx.qpk] (WinSDK Development 6.2.0A (Windows tool) targeting x86)
10:41:36 STATUS: Preliminary actions complete for this repository
10:41:36 STATUS: Generating required QPF files
10:41:36 STATUS: Saving installed QRM to
C:\QNXsdk\host\win32\x86\etc\system\package\installed\a680c89cd4b9341cfb316c
fb8b1f7ace.qrm (“Host Repository (Windows)” at
C:/QNXsdk/host/win32/x86/pkgs/repository/host/win32)
10:41:36 STATUS: Saving installed QRM to
C:\QNXsdk\host\win32\x86\etc\system\package\installed\e0c09735754f01da722547
23188b2626.qrm (“Target Repository (Neutrino)” at
C:/QNXsdk/host/win32/x86/pkgs/repository/target/qnx6)
10:41:36 STATUS: Saved proposed QPF file
(C:/QNXsdk/host/win32/x86/etc/system/package/packages.proposed)
10:41:36 STATUS: Opening QPF
(C:/QNXsdk/host/win32/x86/etc/system/package/packages)
10:41:36 STATUS: Parsing QPF file(s)
10:41:36 STATUS: Parsing QPM file(s)
10:41:38 STATUS: Opening QPF
(C:/QNXsdk/host/win32/x86/etc/system/package/packages.proposed)
10:41:38 STATUS: Parsing QPF file(s)
10:41:38 STATUS: Parsing QPM file(s)
10:41:38 STATUS: Comparing QPF files
(C:/QNXsdk/host/win32/x86/etc/system/package/packages vs.
C:/QNXsdk/host/win32/x86/etc/system/package/packages.proposed)
10:41:38 STATUS: Comparing individual files
10:41:38 STATUS: Spilled file detected for
C:/QNXsdk/host/win32/x86/usr/Eclipse/install/install.properties (at
C:/QNXsdk/host/win32/x86/usr/Eclipse/install/install.properties)
10:41:46 STATUS: Spilled file detected for
C:/QNXsdk/host/win32/x86/usr/Eclipse/plugins/com.qnx.tools.ide.doc.user/src/
com/qnx/tools/ide/doc/user (at
C:/QNXsdk/host/win32/x86/usr/Eclipse/plugins/com.qnx.tools.ide.doc.user/src/
com/qnx/tools/ide/doc/user)
10:41:56 STATUS: Spilled file detected for
C:/QNXsdk/target/qnx6/x86/usr/lib/libmalloc_g.so (at
C:/QNXsdk/target/qnx6/x86/usr/lib/libmalloc_g.so)
10:42:52 STATUS: Locating required packages
10:42:52 STATUS: Package summary complete (0, 7)
10:42:52 STATUS: Created temporary directory
(C:\DOCUME~1\User\LOCALS~1\Temp\plib000732)
10:42:57 STATUS: Committing files to disk
10:43:14 WARNING: Not found in QPK
(C:/QNXsdk/host/win32/x86/usr/Eclipse/plugins/com.qnx.tools.ide.doc.user/src
/com/qnx/tools/ide/doc/user)
10:43:14 STATUS: Applying unions and symlinks
10:43:14 STATUS: Saved proposed QPF as current
(C:/QNXsdk/host/win32/x86/etc/system/package/packages)
10:43:14 STATUS: Post commit for kept original files
10:43:14 STATUS: Action for QNX IDE Patch A 6.2.0A (Windows tool)
targeting
x86 (has been successfully installed)
10:43:14 STATUS: Action for Eclipse 6.2.0A (win32 tool) (has been
successfully installed)
10:43:14 STATUS: Action for Eclipse 6.2.0A (Windows tool) (has been
successfully installed)
10:43:14 STATUS: Action for Eclipse Development 6.2.0A (win32 tool)
(has
been successfully installed)
10:43:14 STATUS: Action for Eclipse Development 6.2.0A (Windows tool)
(has
been successfully installed)
10:43:14 STATUS: Action for malloc 6.2.0A (has been successfully
installed)
10:43:14 STATUS: Action for malloc 6.2.0A targeting x86 (has been
successfully installed)
10:43:14 STATUS: Action for malloc Development 6.2.0A (has been
successfully installed)
10:43:14 STATUS: Action for malloc Development 6.2.0A targeting x86
(has
been successfully installed)
10:43:14 STATUS: Action for malloc shared libraries 6.2.0A (has been
successfully installed)
10:43:14 STATUS: Action for malloc shared libraries 6.2.0A targeting
x86
(has been successfully installed)
10:43:14 STATUS: Action for qconn 6.2.0A (has been successfully
installed)
10:43:14 STATUS: Action for qconn 6.2.0A targeting x86 (has been
successfully installed)
10:43:14 STATUS: Action for WinSDK Development 6.2.0A (win32 tool)
targeting x86 (has been successfully installed)
10:43:14 STATUS: Action for WinSDK Development 6.2.0A (Windows tool)
targeting x86 (has been successfully installed)
10:43:14 STATUS: Saving installed QRM to
C:\QNXsdk\host\win32\x86\etc\system\package\installed\a680c89cd4b9341cfb316c
fb8b1f7ace.qrm (“Host Repository (Windows)” at
C:/QNXsdk/host/win32/x86/pkgs/repository/host/win32)
10:43:14 STATUS: Saving installed QRM to
C:\QNXsdk\host\win32\x86\etc\system\package\installed\e0c09735754f01da722547
23188b2626.qrm (“Target Repository (Neutrino)” at
C:/QNXsdk/host/win32/x86/pkgs/repository/target/qnx6)
10:43:14 STATUS: Actions completed
10:43:14 STATUS: Actions successfully completed.
10:50:12 STATUS: Created temporary directory
(C:\DOCUME~1\User\LOCALS~1\Temp\plib000851)
10:50:12 STATUS: Opening repository… (“SUPRUN.QPR” at
X:/Public/Neutrino
Patch/SUPRUN.QPR)
10:50:13 STATUS: Created temporary directory
(C:\DOCUME~1\User\LOCALS~1\Temp\plib014386)
10:50:14 STATUS: Repository has been opened (45 packages)
10:50:14 STATUS: Saving remote QRM to
C:\QNXsdk\host\win32\x86\etc\system\package\sources.qrm (“SUPRUN.QPR”
at
X:/Public/Neutrino Patch/SUPRUN.QPR)
10:50:33 STATUS: Dependency check started…
10:50:33 STATUS: Dependency check completed (fully satisfied)
10:50:37 STATUS: Actions being performed…
10:50:37 STATUS: Performing preliminary actions in this repository…
(“QNX
IDE Patch A” at X:/Public/Neutrino Patch/IDE_620AIDE.QPR)
10:50:37 STATUS: Preliminary actions complete for this repository
10:50:37 STATUS: Performing preliminary actions in this repository…
(“SUPRUN.QPR” at X:/Public/Neutrino Patch/SUPRUN.QPR)
10:50:37 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib014386\b-suprun-winsdk-6.2.0-x86-qnx.qpk
] (Supplementary Run-time Package 6.2.0 (win32 tool) targeting x86)
10:50:37 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib014386\hat-1.1.0-qnx.qpk] (High
Availability Toolkit 1.1.0)
10:50:37 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib014386\hat-1.1.0-x86-qnx.qpk] (High
Availability Toolkit 1.1.0 targeting x86)
10:50:37 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib014386\hat_x86-1.1.0-qnx.qpk] (High
Availability Toolkit 1.1.0 targeting x86)
10:50:37 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib014386\suprun-6.2.0-qnx.qpk]
(Supplementary Runtime 6.2.0)
10:50:37 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib014386\suprun-6.2.0-x86-qnx.qpk]
(Supplementary Runtime 6.2.0 targeting x86)
10:50:37 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib014386\suprun-drivers-6.2.0-qnx.qpk]
(Runtime Drivers 6.2.0)
10:50:37 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib014386\suprun-drivers-6.2.0-x86-qnx.qpk]
(Runtime Drivers 6.2.0 targeting x86)
10:50:37 STATUS: Preliminary actions complete for this repository
10:50:37 STATUS: Generating required QPF files
10:50:37 STATUS: Saving installed QRM to
C:\QNXsdk\host\win32\x86\etc\system\package\installed\a680c89cd4b9341cfb316c
fb8b1f7ace.qrm (“Host Repository (Windows)” at
C:/QNXsdk/host/win32/x86/pkgs/repository/host/win32)
10:50:37 STATUS: Saving installed QRM to
C:\QNXsdk\host\win32\x86\etc\system\package\installed\e0c09735754f01da722547
23188b2626.qrm (“Target Repository (Neutrino)” at
C:/QNXsdk/host/win32/x86/pkgs/repository/target/qnx6)
10:50:37 STATUS: Saved proposed QPF file
(C:/QNXsdk/host/win32/x86/etc/system/package/packages.proposed)
10:50:37 STATUS: Opening QPF
(C:/QNXsdk/host/win32/x86/etc/system/package/packages)
10:50:37 STATUS: Parsing QPF file(s)
10:50:37 STATUS: Parsing QPM file(s)
10:50:38 STATUS: Opening QPF
(C:/QNXsdk/host/win32/x86/etc/system/package/packages.proposed)
10:50:38 STATUS: Parsing QPF file(s)
10:50:38 STATUS: Parsing QPM file(s)
10:50:38 STATUS: Comparing QPF files
(C:/QNXsdk/host/win32/x86/etc/system/package/packages vs.
C:/QNXsdk/host/win32/x86/etc/system/package/packages.proposed)
10:50:38 STATUS: Comparing individual files
10:50:43 STATUS: Locating required packages
10:50:43 STATUS: Package summary complete (0, 6)
10:50:44 STATUS: Created temporary directory
(C:\DOCUME~1\User\LOCALS~1\Temp\plib017786)
10:50:44 STATUS: Committing files to disk
10:50:45 STATUS: Applying unions and symlinks
10:50:45 STATUS: Saved proposed QPF as current
(C:/QNXsdk/host/win32/x86/etc/system/package/packages)
10:50:45 STATUS: Post commit for kept original files
10:50:45 STATUS: Action for Supplementary Run-time Package 6.2.0 (win32
tool) targeting x86 (has been successfully installed)
10:50:45 STATUS: Action for High Availability Toolkit 1.1.0 (has been
successfully installed)
10:50:45 STATUS: Action for High Availability Toolkit 1.1.0 targeting
x86
(has been successfully installed)
10:50:45 STATUS: Action for High Availability Toolkit 1.1.0 targeting
x86
(has been successfully installed)
10:50:45 STATUS: Action for Supplementary Runtime 6.2.0 (has been
successfully installed)
10:50:45 STATUS: Action for Supplementary Runtime 6.2.0 targeting x86
(has
been successfully installed)
10:50:45 STATUS: Action for Runtime Drivers 6.2.0 (has been
successfully
installed)
10:50:45 STATUS: Action for Runtime Drivers 6.2.0 targeting x86 (has
been
successfully installed)
10:50:45 STATUS: Saving installed QRM to
C:\QNXsdk\host\win32\x86\etc\system\package\installed\a680c89cd4b9341cfb316c
fb8b1f7ace.qrm (“Host Repository (Windows)” at
C:/QNXsdk/host/win32/x86/pkgs/repository/host/win32)
10:50:45 STATUS: Saving installed QRM to
C:\QNXsdk\host\win32\x86\etc\system\package\installed\e0c09735754f01da722547
23188b2626.qrm (“Target Repository (Neutrino)” at
C:/QNXsdk/host/win32/x86/pkgs/repository/target/qnx6)
10:50:45 STATUS: Actions completed
10:50:45 STATUS: Actions successfully completed.
10:51:17 STATUS: Created temporary directory
(C:\DOCUME~1\User\LOCALS~1\Temp\plib028134)
10:51:21 STATUS: Opening repository… (“PATCHA_PE.QPR” at
X:/Public/Neutrino Patch/PATCHA_PE.QPR)
10:51:21 STATUS: Created temporary directory
(C:\DOCUME~1\User\LOCALS~1\Temp\plib018440)
10:51:26 STATUS: Repository has been opened (79 packages)
10:51:27 STATUS: Saving remote QRM to
C:\QNXsdk\host\win32\x86\etc\system\package\sources.qrm
(“PATCHA_PE.QPR”
at
X:/Public/Neutrino Patch/PATCHA_PE.QPR)
10:51:30 STATUS: Dependency check started…
10:51:30 STATUS: Dependency check completed (fully satisfied)
10:51:34 STATUS: Actions being performed…
10:51:34 STATUS: Performing preliminary actions in this repository…
(“QNX
IDE Patch A” at X:/Public/Neutrino Patch/IDE_620AIDE.QPR)
10:51:34 STATUS: Preliminary actions complete for this repository
10:51:34 STATUS: Performing preliminary actions in this repository…
(“SUPRUN.QPR” at X:/Public/Neutrino Patch/SUPRUN.QPR)
10:51:34 STATUS: Preliminary actions complete for this repository
10:51:34 STATUS: Performing preliminary actions in this repository…
(“PATCHA_PE.QPR” at X:/Public/Neutrino Patch/PATCHA_PE.QPR)
10:51:34 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib018440\audio-ddk-upd-6.2.0A-qnx.qpk]
(Audio DDK 6.2.0A)
10:51:34 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib018440\b-os-pe-winsdk-6.2.0A-x86-qnx.qpk
] (QNX Momentics PE 6.2.0A (Windows tool) targeting x86)
10:51:34 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib018440\b-os-se-winsdk-6.2.0A-x86-qnx.qpk
] (QNX Momentics SE 6.2.0A (Windows tool) targeting x86)
10:51:34 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib018440\os-update-2.1.3A-qnx.qpk]
(QNX
Neutrino OS 2.1.3A)
10:51:34 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib018440\os-update-2.1.3A-x86-qnx.qpk]
(QNX Neutrino OS 2.1.3A targeting x86)
10:51:34 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib018440\os-update-drivers-2.1.3A-qnx.qpk]
(QNX Neutrino OS Device Drivers 2.1.3A)
10:51:34 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib018440\os-update-drivers-2.1.3A-x86-qnx.
qpk] (QNX Neutrino OS Device Drivers 2.1.3A targeting x86)
10:51:34 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib018440\ph-update-2.0.3A-qnx.qpk]
(QNX
Photon 2.0.3A)
10:51:34 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib018440\ph-update-2.0.3A-x86-qnx.qpk]
(QNX Photon 2.0.3A targeting x86)
10:51:35 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib018440\ph-update-dev_x86-2.0.3A-qnx.qpk]
(QNX Photon Development 2.0.3A targeting x86)
10:51:35 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib018440\winsdk-update-1.1.1A-qnx.qpk]
(WinSDK 1.1.1A (win32 tool))
10:51:35 STATUS: Install package MANIFEST
[C:/DOCUME~1/User/LOCALS~1/Temp/plib018440\winsdk-update-1.1.1A-x86-qnx.qpk]
(WinSDK 1.1.1A (Windows tool))
10:51:35 STATUS: Preliminary actions complete for this repository
10:51:35 STATUS: Generating required QPF files
10:51:35 STATUS: Saving installed QRM to
C:\QNXsdk\host\win32\x86\etc\system\package\installed\a680c89cd4b9341cfb316c
fb8b1f7ace.qrm (“Host Repository (Windows)” at
C:/QNXsdk/host/win32/x86/pkgs/repository/host/win32)
10:51:35 STATUS: Saving installed QRM to
C:\QNXsdk\host\win32\x86\etc\system\package\installed\e0c09735754f01da722547
23188b2626.qrm (“Target Repository (Neutrino)” at
C:/QNXsdk/host/win32/x86/pkgs/repository/target/qnx6)
10:51:35 STATUS: Saved proposed QPF file
(C:/QNXsdk/host/win32/x86/etc/system/package/packages.proposed)
10:51:35 STATUS: Opening QPF
(C:/QNXsdk/host/win32/x86/etc/system/package/packages)
10:51:35 STATUS: Parsing QPF file(s)
10:51:35 STATUS: Parsing QPM file(s)
10:51:36 STATUS: Opening QPF
(C:/QNXsdk/host/win32/x86/etc/system/package/packages.proposed)
10:51:36 STATUS: Parsing QPF file(s)
10:51:36 STATUS: Parsing QPM file(s)
10:51:36 STATUS: Comparing QPF files
(C:/QNXsdk/host/win32/x86/etc/system/package/packages vs.
C:/QNXsdk/host/win32/x86/etc/system/package/packages.proposed)
10:51:36 STATUS: Comparing individual files
10:51:39 STATUS: Spilled file detected for
C:/QNXsdk/target/qnx6/x86/usr/sbin/fs-cifs (at
C:/QNXsdk/target/qnx6/x86/usr/sbin/fs-cifs)
10:51:39 STATUS: Spilled file detected for
C:/QNXsdk/target/qnx6/x86/sbin/fs-pkg (at
C:/QNXsdk/target/qnx6/x86/sbin/fs-pkg)
10:52:20 STATUS: Locating required packages
10:52:20 STATUS: Package summary complete (0, 6)
10:52:21 STATUS: Created temporary directory
(C:\DOCUME~1\User\LOCALS~1\Temp\plib013024)
10:52:21 STATUS: Committing files to disk
10:52:23 STATUS: Applying unions and symlinks
10:52:23 STATUS: Saved proposed QPF as current
(C:/QNXsdk/host/win32/x86/etc/system/package/packages)
10:52:23 STATUS: Post commit for kept original files
10:52:23 STATUS: Action for Audio DDK 6.2.0A (has been successfully
installed)
10:52:23 STATUS: Action for QNX Momentics PE 6.2.0A (Windows tool)
targeting x86 (has been successfully installed)
10:52:23 STATUS: Action for QNX Momentics SE 6.2.0A (Windows tool)
targeting x86 (has been successfully installed)
10:52:23 STATUS: Action for QNX Neutrino OS 2.1.3A (has been
successfully
installed)
10:52:23 STATUS: Action for QNX Neutrino OS 2.1.3A targeting x86 (has
been
successfully installed)
10:52:23 STATUS: Action for QNX Neutrino OS Device Drivers 2.1.3A (has
been
successfully installed)
10:52:23 STATUS: Action for QNX Neutrino OS Device Drivers 2.1.3A
targeting
x86 (has been successfully installed)
10:52:23 STATUS: Action for QNX Photon 2.0.3A (has been successfully
installed)
10:52:23 STATUS: Action for QNX Photon 2.0.3A targeting x86 (has been
successfully installed)
10:52:23 STATUS: Action for QNX Photon Development 2.0.3A targeting x86
(has been successfully installed)
10:52:23 STATUS: Action for WinSDK 1.1.1A (win32 tool) (has been
successfully installed)
10:52:23 STATUS: Action for WinSDK 1.1.1A (Windows tool) (has been
successfully installed)
10:52:23 STATUS: Saving installed QRM to
C:\QNXsdk\host\win32\x86\etc\system\package\installed\e0c09735754f01da722547
23188b2626.qrm (“Target Repository (Neutrino)” at
C:/QNXsdk/host/win32/x86/pkgs/repository/target/qnx6)
10:52:23 STATUS: Saving installed QRM to
C:\QNXsdk\host\win32\x86\etc\system\package\installed\a680c89cd4b9341cfb316c
fb8b1f7ace.qrm (“Host Repository (Windows)” at
C:/QNXsdk/host/win32/x86/pkgs/repository/host/win32)
10:52:23 STATUS: Actions completed
10:52:23 STATUS: Actions successfully completed.
10:53:18 STATUS: Removed temporary directory
(C:/DOCUME~1/User/LOCALS~1/Temp/plib006334)
10:53:18 STATUS: Removed temporary directory
(C:/DOCUME~1/User/LOCALS~1/Temp/plib026500)
10:53:18 STATUS: Removed temporary directory
(C:/DOCUME~1/User/LOCALS~1/Temp/plib000732)
10:53:18 STATUS: Removed temporary directory
(C:/DOCUME~1/User/LOCALS~1/Temp/plib000851)
10:53:19 STATUS: Removed temporary directory
(C:/DOCUME~1/User/LOCALS~1/Temp/plib014386)
10:53:19 STATUS: Removed temporary directory
(C:/DOCUME~1/User/LOCALS~1/Temp/plib017786)
10:53:19 STATUS: Removed temporary directory
(C:/DOCUME~1/User/LOCALS~1/Temp/plib028134)
10:53:19 STATUS: Removed temporary directory
(C:/DOCUME~1/User/LOCALS~1/Temp/plib018440)
10:53:19 STATUS: Removed temporary directory
(C:/DOCUME~1/User/LOCALS~1/Temp/plib013024)
10:53:19 STATUS: Removed temporary directory
(C:/DOCUME~1/User/LOCALS~1/Temp/plib000041)
10:53:19 STATUS: Session closed
10:53:19 STATUS: Log file closed on 2003-05-29“Jerry Chappell” <> jchappell@qnx.com> > wrote in message
news:bb7js4$gkp$> 1@nntp.qnx.com> …
You can post the $QNX_HOST/etc/system/package/session.log* file (the
biggest
one is likely the one that was made during your installation) here and
we
will look it over for any errors that occurred during installation.Jerry Chappell
“Johannes” <> Jsukamtoh@infolink.co.id> > wrote in message
news:bb6bsf$2jj$> 1@inn.qnx.com> …
Chris, may I know what to check (like list of files, environment
variables,
registry, etc.) to verify that the installation process is OK? The
QNX
Installer shows successful message when the installation was
completed,
but
something may have been missing. Where to look for the installation
log
file? Thanks.
\
JS <jsukamtoh@infolink.co.id> wrote:
I am not sure how to do that. Can you please show me the step? I am running
IDE on Windows XP Pro.
Start Menu → Programs → QNX Momentics → Command Shell
Then type in “qcc” and hit enter. What does it report?
chris
–
Chris McKillop <cdm@qnx.com> “The faster I go, the behinder I get.”
Software Engineer, QSSL – Lewis Carroll –
http://qnx.wox.org/
We need the answer to this to continue to assist you.
“Chris McKillop” <cdm@qnx.com> wrote in message
news:bbg85b$n17$1@nntp.qnx.com…
JS <> jsukamtoh@infolink.co.id> > wrote:
I am not sure how to do that. Can you please show me the step? I am
running
IDE on Windows XP Pro.
Start Menu → Programs → QNX Momentics → Command ShellThen type in “qcc” and hit enter. What does it report?
chris
–
Chris McKillop <> cdm@qnx.com> > “The faster I go, the behinder I get.”
Software Engineer, QSSL – Lewis Carroll –
http://qnx.wox.org/
It shows the following message:
Unable to connect to QNXlm service.
“Chris McKillop” <cdm@qnx.com> wrote in message
news:bbg85b$n17$1@nntp.qnx.com…
JS <> jsukamtoh@infolink.co.id> > wrote:
I am not sure how to do that. Can you please show me the step? I am
running
IDE on Windows XP Pro.
Start Menu → Programs → QNX Momentics → Command ShellThen type in “qcc” and hit enter. What does it report?
chris
–
Chris McKillop <> cdm@qnx.com> > “The faster I go, the behinder I get.”
Software Engineer, QSSL – Lewis Carroll –
http://qnx.wox.org/
FLEXlm → Config Services → View Log shows the followings:
5:34:06 (lmgrd) -----------------------------------------------
5:34:06 (lmgrd) Please Note:
5:34:06 (lmgrd)
5:34:06 (lmgrd) This log is intended for debug purposes only.
5:34:06 (lmgrd) There are many details in licensing policies
5:34:06 (lmgrd) that are not reported in the information logged
5:34:06 (lmgrd) here, so if you use this log file for any kind
5:34:06 (lmgrd) of usage reporting you will generally produce
5:34:06 (lmgrd) incorrect results.
5:34:06 (lmgrd)
5:34:06 (lmgrd) -----------------------------------------------
5:34:06 (lmgrd)
5:34:06 (lmgrd)
5:34:06 (lmgrd) pid 200
5:34:06 (lmgrd) Detecting other lmgrd processes…
5:34:08 (lmgrd) Done rereading
5:34:08 (lmgrd) FLEXlm (v8.1a) started on MIP-JS (IBM PC) (6/3/2003)
5:34:08 (lmgrd) FLEXlm Copyright 1988-2002, Globetrotter Software, Inc.
5:34:08 (lmgrd) US Patents 5,390,297 and 5,671,412.
5:34:08 (lmgrd) World Wide Web: http://www.globetrotter.com
5:34:08 (lmgrd) License file(s): c:\QNXsdk\QNXLicense.lic
5:34:08 (lmgrd) lmgrd tcp-port 27000
5:34:08 (lmgrd) Starting vendor daemons …
5:34:08 (lmgrd) Started qnxlm (pid 224)
5:34:08 (qnxlm) Server started on MIP-JS for: QNX_SE
5:34:08 (qnxlm) QNX_PE
5:34:08 (lmgrd) qnxlm using TCP-port 3053
5:36:26 (qnxlm) Checkin failed feature “QNX_SE”: User MIP-JS MIP-JS
5:36:26 (qnxlm) “”
5:36:26 (qnxlm) Checkin failed feature “QNX_PE”: User MIP-JS MIP-JS
5:36:26 (qnxlm) “”
bash-2.03$ netstat -a displays the following:
Active Connections
Proto Local Address Foreign Address State
TCP MIP-JS:epmap MIP-JS:0 LISTENING
TCP MIP-JS:microsoft-ds MIP-JS:0 LISTENING
TCP MIP-JS:1025 MIP-JS:0 LISTENING
TCP MIP-JS:1027 MIP-JS:0 LISTENING
TCP MIP-JS:3039 MIP-JS:0 LISTENING
TCP MIP-JS:3041 MIP-JS:0 LISTENING
TCP MIP-JS:3053 MIP-JS:0 LISTENING
TCP MIP-JS:5000 MIP-JS:0 LISTENING
TCP MIP-JS:27000 MIP-JS:0 LISTENING
TCP MIP-JS:3001 MIP-JS:0 LISTENING
TCP MIP-JS:3002 MIP-JS:0 LISTENING
TCP MIP-JS:3003 MIP-JS:0 LISTENING
TCP MIP-JS:3006 MIP-JS:0 LISTENING
TCP MIP-JS:3039 inn.qnx.com:nntp ESTABLISHED
TCP MIP-JS:3041 baym-cs154.msgr.hotmail.com:1863
ESTABLISHED
TCP MIP-JS:8360 MIP-JS:0 LISTENING
UDP MIP-JS:epmap :
UDP MIP-JS:microsoft-ds :
UDP MIP-JS:isakmp :
UDP MIP-JS:1026 :
UDP MIP-JS:3007 :
UDP MIP-JS:3015 :
UDP MIP-JS:3055 :
UDP MIP-JS:ntp :
UDP MIP-JS:1900 :
UDP MIP-JS:3018 :
UDP MIP-JS:ntp :
UDP MIP-JS:1900 :
UDP MIP-JS:8121 :
UDP MIP-JS:12860 :
So looks like FLEXlm is listening to port 3053 correctly. And the port
number changed when I restart FLEXlm service.
“Jeff Baker” <jbaker@qnx.com> wrote in message
news:bbgc5n$rpb$1@nntp.qnx.com…
We need the answer to this to continue to assist you.
“Chris McKillop” <> cdm@qnx.com> > wrote in message
news:bbg85b$n17$> 1@nntp.qnx.com> …
JS <> jsukamtoh@infolink.co.id> > wrote:
I am not sure how to do that. Can you please show me the step? I am
running
IDE on Windows XP Pro.
Start Menu → Programs → QNX Momentics → Command ShellThen type in “qcc” and hit enter. What does it report?
chris
–
Chris McKillop <> cdm@qnx.com> > “The faster I go, the behinder I
get.”
Software Engineer, QSSL – Lewis Carroll –
http://qnx.wox.org/
\
Here is some additional information:
When I run List All Vendor Paths in LMTOOLS’ Utilities, it reports the
following:
Listing All Vendor Paths
Other Vendors:
C:\flexlm\license.dat
“Chris McKillop” <cdm@qnx.com> wrote in message
news:bbg85b$n17$1@nntp.qnx.com…
JS <> jsukamtoh@infolink.co.id> > wrote:
I am not sure how to do that. Can you please show me the step? I am
running
IDE on Windows XP Pro.
Start Menu → Programs → QNX Momentics → Command ShellThen type in “qcc” and hit enter. What does it report?
chris
–
Chris McKillop <> cdm@qnx.com> > “The faster I go, the behinder I get.”
Software Engineer, QSSL – Lewis Carroll –
http://qnx.wox.org/
Open the Window Services Manager (Start → Run → “services.msc”). Is there
an entry called ‘QNXlm License Proxy’? If so, start that service and try
running ‘qcc’ on the command line again. You might also wish to open the
properties for that service and set it to start automatically. Otherwise
you’ll have to do this everytime you reboot the computer.
“Johannes” <Jsukamtoh@infolink.co.id> wrote in message
news:bbgi9i$l11$1@inn.qnx.com…
It shows the following message:
Unable to connect to QNXlm service.“Chris McKillop” <> cdm@qnx.com> > wrote in message
news:bbg85b$n17$> 1@nntp.qnx.com> …
JS <> jsukamtoh@infolink.co.id> > wrote:
I am not sure how to do that. Can you please show me the step? I am
running
IDE on Windows XP Pro.
Start Menu → Programs → QNX Momentics → Command ShellThen type in “qcc” and hit enter. What does it report?
chris
–
Chris McKillop <> cdm@qnx.com> > “The faster I go, the behinder I
get.”
Software Engineer, QSSL – Lewis Carroll –
http://qnx.wox.org/
\
JS wrote:
I have installed and run flexlm with permanent license. Flexlm diagnostic
shows no error. …
I’ve been through this before with other (non-QNX) FlexLM based products.
In general, we don’t buy anything that uses FlexLM if there’s
any possible alternative. It’s an old, badly designed system, and five years
and acquisition by Macrovision haven’t helped.
As an end user, expect that about half of installations of anything
involving FlexLM will fail on the first try. Expect trouble
figuring out what’s wrong. Understand that sometimes FlexLM
lies to you for “security reasons”. Budget about two extra
days for any installation involving FlexLM. Avoid
FlexLM-using packages from multiple vendors on
the same machine or network; version incompatibility
problems are common.
As a vendor, expect about 0.5 support calls per FlexLM
installation. Hire extra tech support people accordingly.
Macrovision offers a two-day course for end users
of software that uses FlexLM. It’s called “License Management
for End Users and System Administrators”, and costs $995.
Travel to Santa Clara, California or Waltham, Massachusetts is required.
(This is just the two-day short course for end users; complete
FlexLM training for developers and tech support people takes six
class days.) Click below to sign up.
http://www.macrovision.com/solutions/esd/training/coursedesc.shtml
John Nagle
Animats
It works! Thanks Jeff and Chris. Did I miss anything during the installation
which caused the proxy service not running?
“Jeff Baker” <jbaker@qnx.com> wrote in message
news:bbiaa0$71h$1@nntp.qnx.com…
Open the Window Services Manager (Start → Run → “services.msc”). Is
there
an entry called ‘QNXlm License Proxy’? If so, start that service and try
running ‘qcc’ on the command line again. You might also wish to open the
properties for that service and set it to start automatically. Otherwise
you’ll have to do this everytime you reboot the computer.“Johannes” <> Jsukamtoh@infolink.co.id> > wrote in message
news:bbgi9i$l11$> 1@inn.qnx.com> …
It shows the following message:
Unable to connect to QNXlm service.“Chris McKillop” <> cdm@qnx.com> > wrote in message
news:bbg85b$n17$> 1@nntp.qnx.com> …
JS <> jsukamtoh@infolink.co.id> > wrote:
I am not sure how to do that. Can you please show me the step? I am
running
IDE on Windows XP Pro.
Start Menu → Programs → QNX Momentics → Command ShellThen type in “qcc” and hit enter. What does it report?
chris
–
Chris McKillop <> cdm@qnx.com> > “The faster I go, the behinder I
get.”
Software Engineer, QSSL – Lewis Carroll –
http://qnx.wox.org/
\